ENR Construction

JUNE 19, 2025

billion West Coast Biomedical Research Hub project’s scope includes design and construction of building space; purchase and installation of fume hoods, stainless steel piping, refrigeration/freezers, and wet laboratory, formulation, testing, filtration and air handling equipment and systems. The estimated $1.1-billion Eli Lilly and Co.,

Piping Installation 36

Piping Installation Renewable Energy Systems Building Materials Manufacturing Site Planning 36

UK Construction Blog

JULY 18, 2025

Easy processing and installation using standard tools – you can saw, drill, paint, and bend PVC sheets with conventional workshop equipment, whilst their smooth surfaces accept printing and inscription work perfectly. Foamed PVC consists of a lightweight plastic foam core with paper lamination on both sides.

Fire Protection System Installation 40

Fire Protection System Installation Building Materials Manufacturing Fire Protection Systems Material Storage 40

For Construction Pros

JULY 22, 2025

Inspired by Pinterest and Instagram projects, homeowners and contractors alike want a plan to transform their landscapes into living areas by changing terrains, removing trees, and installing utility lines or LED lights. Walk-behind trenchers are ideal for digging narrow trenches for irrigation systems, electrical lines, or drainage pipes.

Construction Equipment 52

Construction Equipment Piping Installation Electrical Systems Landscaping 52

Civil + Structural Engineer

MARCH 18, 2024

PEX: State-of-the-Art for Potable Water; Historical Overview of Discontinued PB Piping Materials Also Examined IRVING, Texas – A new technical document that addresses the critical differences between crosslinked polyethylene (PEX) tubing systems with polybutylene (PB) systems has been published by the Plastics Pipe Institute, Inc.

Plumbing Systems 130

Plumbing Systems Plumbing Piping Installation Wall Systems 130

Construction Marketing

MARCH 2, 2023

Water heating can be expensive especially if you are dealing with old pipes and boiler systems. Ground Source Heat Pump These pumps use the ground as a heat source, this is done by adding a system of pipes underground in areas where the temperatures are consistently 10-15°C. This can be done horizontally or vertically.

Renewable Energy Systems 115

Renewable Energy Systems Piping Installation Energy Efficiency Roofing Systems 115

Civil + Structural Engineer

JANUARY 12, 2024

The EV Series 4000 pump station comes as a complete, factory-built and tested system that is fast and simple to install in both new installations and replacements of submersible pumps. is a global manufacturing leader of engineered systems for the water and mining industries with installations in more than 75 nations around the world.

Piping Installation 130

Piping Installation Maintenance Energy Efficiency Cost Control 130

Civil + Structural Engineer

AUGUST 19, 2024

Pump Station facilities comprise a receiving well (wet-well) that is equipped with pumps, pipes, valves, power supply, and control systems and may include a screen or other specialized components designed to mitigate against heavy clogging materials along with systems for odor control and ventilation.

Piping Installation 130

Piping Installation Lifts Electrical Wiring Installation Electrical Systems 130

Roads Online

OCTOBER 29, 2023

Understanding the benefits of highly durable reinforced precast concrete, head contractor Garli Pty Ltd engaged National Precast Master Precaster MJB Industries to supply the Main Roads designed box and pipe culverts for the project. 2100 wide x 1800 high box culverts were manufactured and supplied for the causeways, as well as 102 no.

Stakeholder Engagement 111

Stakeholder Engagement Environmental Consulting Piping Installation Historic Preservation 111

Civil + Structural Engineer

FEBRUARY 18, 2025

From powering machinery in manufacturing facilities to sterilizing equipment in healthcare settings, the importance of steam cannot be overstated. Piping is responsible for distributing the steam to different parts of the facility. One common issue is steam leakage, which can occur due to faulty valves, fittings, or failed piping.

Energy Efficiency 130

Energy Efficiency HVAC System Installation Foundation Systems Piping Installation 130

Job Order Contracting

DECEMBER 21, 2021

Lightly lubricate vane control linkage bearings, ball joints and pivot points. Remove refrigerant in accordance with manufacturer’s instructions. Manufacturers typically recommended that oil should be changed after the first year of operation and every five years thereafter. Inspect relief valves and piping.

Maintenance 105

Maintenance Building Materials Manufacturing HVAC System Installation Controls Manufacturing 105

CCR Magazine

AUGUST 29, 2024

Shower Faucets Kinds of shower faucets are given below: Single-Handled Faucets This sort of faucet has one lever that controls both hot and cold water. Double-Handle Faucets These faucets have two levers, one containing hot water and the other controlling cold water. Control the Water Damage. Eco-friendly alternatives.

Piping Installation 52

Piping Installation Controls Manufacturing Environmental Consulting Wall Systems 52

Roads Online

OCTOBER 21, 2024

Roads & Infrastructure sits down with the conglomerate responsible for the product’s manufacture and distribution to learn more about its groundbreaking design. In the past 18 months, Ingal Civil Products and its manufacturing partners have managed to build upon what was already a popular design.

Sustainability 105

Sustainability Building Products Distribution Building Materials Manufacturing Controls Manufacturing 105

CCR Magazine

DECEMBER 12, 2024

ONeal offers highly specialized design across a broad range of engineering disciplines including structural, process mechanical, process chemical, piping, electrical, fire protection, automation and process controls. Quest Site Solutions provides site location analysis and selection for public and private clients throughout the U.S.

Engineering 52

Engineering Piping Installation Controls Manufacturing Site Planning 52

CCR Magazine

SEPTEMBER 14, 2024

Design Envelope Tango is a compact solution that reduces installation costs. Because the two rotating devices share a single casing, installation requires less piping. In addition, the Vertical In-Line orientation means the pump is installed in the piping and does not require an inertia base.

HVAC System Installation 52

HVAC System Installation Fire Protection System Installation HVAC Systems Piping Installation 52

CCR Magazine

AUGUST 19, 2024

Visual Pipe Inspection A standard visual pipe inspection averages around $175. A high-definition camera is fed through your pipes giving real-time imagery of potential issues like breaks. While compression valves demand greater installation expertise, push-fit counterparts are simpler but harder to eradicate.

Plumbing 52

Plumbing Piping Installation Plumbing Systems Inspection 52

UK Construction Blog

JUNE 13, 2023

Have you ever faced the challenge of connecting a new radiator to your existing pipework, only to find that the pipes don’t quite reach? In this comprehensive guide, we’ll explore everything you need to know about extending your radiator pipes and achieving a perfect fit every time.

Piping Installation 52

Piping Installation Wall Systems Painting/finishing Flooring Systems 52

CCR Magazine

DECEMBER 12, 2024

A baby cockroach likes to establish themselves in wall voids, beneath flooring, and around plumbing fixtures areas where traditional pest control methods struggle to reach. Moisture Resistance Controlling moisture is paramount in cockroach prevention.

Building Materials 52

Building Materials Building Materials Manufacturing HVAC System Installation Material Storage 52

Construction Specifier

JULY 20, 2023

Most cooling equipment manufacturers can provide comparisons between fluid coolers and tower/heat exchanger systems. Rigging, installation, and piping costs such as valves, piping, heat tracing, sensors, and even labor. Rigging, installation, and piping costs such as valves, piping, heat tracing, sensors, and even labor.

Piping Installation 52

Piping Installation Cost Control Construction Equipment Controls Manufacturing 52

UK Construction Blog

FEBRUARY 12, 2024

These gadgets, controlled by hydraulic mechanisms, have revolutionized how we installed the doors, offering simple methods as well as improved energy effectiveness. The principal parts incorporate a hydraulic pump, a control valve, and a piston or cylinder.

HVAC System Installation 64

HVAC System Installation Building Controls Cost Control Controls Manufacturing 64

CivilJungle

OCTOBER 18, 2021

For that, we must take permission from different boards before you can go for the construction, like this municipal, airport authority, pollution control, etc. The warranty for appliances and materials are obtained from manufacturers and supplier. The pipe and point end left out this later. Install Insulation.

Painting/finishing 98

Painting/finishing Electrical Wiring Installation Plumbing Systems Masonry 98

CCR Magazine

MARCH 14, 2025

The recent acquisition of Italian-based manufacturer MTA has strengthened our sustainable HVAC offerings and today we announce Tranes first series of process chillers built specifically to meet the cooling needs of manufacturers, including pharmaceutical, food and beverage, and automotive manufacturers, among others, added Roberts.

HVAC System Installation 40

HVAC System Installation Piping Installation HVAC Systems Energy Efficiency 40

CCR Magazine

AUGUST 18, 2023

Because of this, many need expert guidance on how to proceed with the conversion from gas-fired to electric, including the basic requirements and other factors to consider,” says Robert Presser, Vice President of Acme Engineering, a Canada-based manufacturer of commercial and industrial electric boilers with over 60 years of experience.

Electrical Wiring Installation 52

Electrical Wiring Installation Fire Protection System Installation Electrical Systems Piping Installation 52

Revit OpEd

APRIL 14, 2016

Last night I was able to download and install Building Design Suite 2017 from my Autodesk subscription account. We'll be able to create indented lists with a bit more control now and we can place just a leader (empty text). They've added control over Fields, Filters, Sorting/Grouping, and Formatting. VERY interesting!

Steel Fabrication 76

Steel Fabrication Schedule Management Piping Installation Wall Systems 76

CivilJungle

JANUARY 21, 2022

Sintex Plastics Division was started in the year 1975, and today we have the most diversified manufacturing capabilities in plastic processing in the world. Sintex brand is no 1 water tank in India, Headquartered in Kalol, Gujarat, India, it has 17 manufacturing plants across the country and 18 internationally. Ashirvad Pipes Pvt Ltd.

Material Storage 52

Material Storage Piping Installation Building Materials Manufacturing Controls Manufacturing 52

Job Order Contracting

DECEMBER 21, 2021

Lightly lubricate vane control linkage bearings, ball joints and pivot points. Remove refrigerant in accordance with manufacturer’s instructions. Manufacturers typically recommended that oil should be changed after the first year of operation and every five years thereafter. Inspect relief valves and piping.

Maintenance 52

Maintenance Building Materials Manufacturing HVAC System Installation Controls Manufacturing 52

CivilJungle

JANUARY 27, 2021

Glass block floors are generally installed as panels with an array of blocks which are held together by reinforced mortar. Lighting can be installed above the panels which gives an aesthetical look. Manufacturing of Glass blocks required high energy consumption due to which high temperature is required for its production.

Building Materials Manufacturing 52

Building Materials Manufacturing Flooring Systems Piping Installation Ceiling Systems 52

CCR Magazine

NOVEMBER 9, 2023

Johnson Controls , the global leader for smart, healthy and sustainable buildings, announced today the launch of its new 2024 Ducted Systems Academy training opportunities and industry resources. The partnership between Johnson Controls and Johnstone Supply allows us the ability to have great technical training resources.

Building Controls 52

Building Controls Controls Manufacturing Building Commissioning Building Design 52

UK Construction Blog

MAY 16, 2025

Most manufacturing facilities are unaware that their compressed air systems operate with significant inefficiencies. Why Your Factory Might Be Wasting Energy Compressed air systems cost manufacturing facilities more than any other utility. A detailed compressed air audit helps factories control their operational costs effectively.

Energy Efficiency 52

Energy Efficiency Electrical Systems Foundation Systems Piping Installation 52

CivilJungle

FEBRUARY 4, 2021

Adjust the Setting Time of Cement Which Product Is Added in Cement During Manufacturing. Gypsum is added to control the “ setting of cement ”. What Is Soil Vent Pipe | How Does Soil Stack Pipe Works | Soil Vent Pipe Material | Types of Plumbing System. Setting Time of Cement Increases by Adding.

Painting/finishing 98

Painting/finishing Ceiling Systems Piping Installation Building Materials Manufacturing 98

Autodesk Construction Cloud

APRIL 13, 2023

All of this leads to a more controlled and safer jobsite. For example, prefabricated plenums are proof of how off-site manufacturing drives major improvements in safety. Today, you can pre-assemble large portions of the piping, duct, and conduit at floor level and then place it into larger, multi-discipline sections overhead.

Fire Protection System Installation 52

Fire Protection System Installation Prefabrication Roofing Systems Heavy Equipment Manufacturing 52

CCR Magazine

JANUARY 16, 2024

Adaptive Control Systems Adaptive control systems in mini excavators contribute to safety by adjusting the machine’s performance based on the operating conditions. These systems enhance stability and control, especially in challenging urban terrains, further mitigating the risk of accidents.

Renewable Energy Systems 52

Renewable Energy Systems Structural Systems Building Performance Measurement Heavy Equipment Manufacturing 52

CCR Magazine

AUGUST 29, 2024

From powering machinery in manufacturing facilities to sterilizing equipment in healthcare settings, the importance of steam cannot be overstated. Piping is responsible for distributing the steam to different parts of the facility. One common issue is steam leakage, which can occur due to faulty valves, fittings, or failed piping.

Energy Efficiency 52

Energy Efficiency HVAC System Installation Foundation Systems Piping Installation 52

Autodesk Construction Cloud

MAY 30, 2023

And with so many issues impacting construction, industrialized construction provides a higher level of control for schedule, cost, safety, and quality. It’s more about being proactive, predictive, and prescriptive and governing a digital delivery that leads to more optimized fabrication, manufacturing, and assembly onsite.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Controls Manufacturing Building Controls 52

Autodesk Construction Cloud

MAY 30, 2023

And with so many issues impacting construction, industrialized construction provides a higher level of control for schedule, cost, safety, and quality. It’s more about being proactive, predictive, and prescriptive and governing a digital delivery that leads to more optimized fabrication, manufacturing, and assembly onsite.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Controls Manufacturing Building Controls 52

CivilJungle

JANUARY 4, 2022

These are the type of wood that is used in the manufacturing of Flush doors. The Flush doors are not heavier in weight due to which it is very easy to install the flush doors. The hollow core flush doors are hollow from inside and can be made in different sha[pes and are very easy to install. Hollow Core Flush Door. cm width.

Building Materials Manufacturing 52

Building Materials Manufacturing Foundation Systems Fire Protection System Installation Painting/finishing 52

CCR Magazine

OCTOBER 9, 2024

All the lights were taken down, the pipes lowered, and the old motors and rigging systems removed. Rows of package hoists, each about 12 to 14 feet wide, were installed along the studio’s 100-foot length, with three hoists per row, 20 rows. In total, 60 new hoists were installed.

Cost Control 45

Cost Control Public Works Controls Manufacturing Quality Control 45

CCR Magazine

AUGUST 15, 2024

Pest Control Strategies Implementing effective pest control is vital to protecting your home from infestations that can cause damage and health issues. Consider professional pest control services if you’re dealing with persistent issues, as they can provide more comprehensive solutions and preventative measures.

Fire Protection System Installation 52

Fire Protection System Installation HVAC System Installation Fire Protection Systems HVAC Systems 52