Remove Fire Protection System Installation Remove Wall Systems Remove Waterproofing Systems
article thumbnail

The three Ps of prefabricated EIFS: Preparation, production, placement

Construction Specifier

Babaian Photos and illustrations courtesy Simpson Gumpertz & Heger (SGH) In its most general form, exterior insulation and finish systems (EIFS) consist of expanded polystyrene (EPS) insulation board coated with a reinforced polymer-modified cementitious base coat and a polymer-based finish coat. By Alex Ardelean, Elizabeth V.

article thumbnail

Barrier breakthroughs: Achieving airtightness in modern construction

Construction Specifier

When designed and installed correctly, air barriers contribute to the long-term durability of a building. Improving building enclosure performance While energy efficiency might initially suggest well-insulated walls and efficient HVAC systems, controlling air leakage can be just as critical.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Design Advantage for Division 7 – Thermal and Moisture Protection

GCP Applied Technologies

Design Advantage for Division 7 – Thermal and Moisture Protection. As building technologies evolve into more complex systems and assemblies, don't feel like you have to specify alone. GCP’s Design Advantage collaborates with the project team to specify the appropriate products and systems for any construction project.

article thumbnail

Innovative Approaches to Cavity Wall Insulation for Builders

UK Construction Blog

The post Innovative Approaches to Cavity Wall Insulation for Builders appeared first on UK Construction Blog. You’re probably used to standard batt or blown-fibre installs, but fresh regulations and unpredictable weather are nudging you toward smarter cavity wall solutions.

article thumbnail

Curtain wall design-assist: Navigating the process for success

Construction Specifier

Curtain wall systems are ever present in today’s commercial construction marketplace. The architectural design of curtain walls must be developed alongside increasing demand for high-performing, energy-efficient solutions. Jackson, AIA Photo courtesy Simpson Gumpertz & Heger Inc.

article thumbnail

Top 10 Construction Defects: Prevent These Costly Building Mistakes

UK Construction Blog

The most dangerous defects include structural issues (foundation cracks, wall collapses), water infiltration, electrical/plumbing failures and HVAC system problems, which often remain hidden for years. Examples include improperly installed plumbing, electrical wiring errors, and poor finishes.

article thumbnail

Design Advantage for Division 7 – Thermal and Moisture Protection

GCP Applied Technologies

Design Advantage for Division 7 – Thermal and Moisture Protection. As building technologies evolve into more complex systems and assemblies, don't feel like you have to specify alone. GCP’s Design Advantage collaborates with the project team to specify the appropriate products and systems for any construction project.