LetsBuild

JULY 21, 2023

Quality control – it’s the foundation of any construction project’s success, impacting every phase of the build. It goes hand in hand with cost control, safety improvements , and better project outcomes. Unfortunately, construction quality control comes with many challenges.

Quality Control 52

Quality Control Cost Control Quality Assurance Building Controls 52

Civil + Structural Engineer

JANUARY 10, 2024

However, good quality data is an essential pre-requisite for those seeking to leverage historic project knowledge, improve risk management and make workforce productivity improvements. Organizations want to know for themselves what impact they could have and whether their outputs will match their own experience.

Integrated Project Delivery (IPD) 130

Integrated Project Delivery (IPD) Risk Management Quality Assurance Schedule Management 130

Field Wire

AUGUST 7, 2023

“Quality Assurance” and “Quality Control” are often times mistakenly used as interchangeable terms when discussing the broad issue of quality in construction; however, these two terms actually describe very different activities. The conditions that we are presented with simply overtax our currently used processes.

Quality Assurance 98

Quality Assurance Quality Control Change Management Project Management 98

Roads Online

APRIL 15, 2024

But growing the business and its platform did present multiple challenges. One of the biggest being the need to develop a system that could cater for one of Australia’s most dynamic industries. Lee Vossen, Traffic Manager – Seymour Whyte Construction. Image: NSW Government.

Schedule Management 105

Schedule Management Infrastructure Development Project Management Risk Management 105

CCR Magazine

MARCH 21, 2025

SAFR SCAN, the AI-powered face authentication solution designed for mainstream commercial applications, has achieved a flawless 0% success rate against presentation attacks in independent testing conducted by iBeta, the industry standard for anti-spoofing testing. </p>

Quality Control 52

Quality Control Quality Assurance Building Controls Building Codes 52

Construction Specifier

MARCH 5, 2022

As a result, the growing number of aging in-place SSG systems present an increasing need for in-situ renewal and glazing replacement.

Quality Assurance 52

Quality Assurance Structural Systems Renewable Energy Systems Quality Control 52

Roads Online

JULY 10, 2024

Initially starting his journey alongside his father laying asphalt, Walker co-founded ANA Asphalts to provide a local-first service that’s focused on providing the highest quality. As he explains, the company represents a mix between the service and thoughtfulness of a local business with the quality and scope of a larger provider.

Construction Machinery 104

Construction Machinery Quality Control Quality Assurance Infrastructure Development 104

Civil + Structural Engineer

JUNE 10, 2024

Jeremy’s leadership qualities are also evident in his ability to inspire and motivate those around him. In addition to his professional and educational endeavors, Jeremy is deeply involved in acts of public service and believes in using his skills to contribute to the community and make a positive impact on society.

Project Management Consulting 147

Project Management Consulting Environmental Impact Assessment Public Works Project Management 147

KCM Group

SEPTEMBER 23, 2020

The company has developed a strong track record of delivering for their clients by identifying cost savings, streamlining processes, and ensuring a high-quality finished product. “I “If we need a construction expert, KCM Group is one of our go-to firms.” The project is anticipated to be complete in January 2021.

Quality Assurance 52

Quality Assurance Project Management Consulting Building Code Compliance Quality Control 52

iField Smart

MARCH 17, 2024

Introduction Construction management entails coordinating and overseeing various project corners including planning, scheduling, risk reduction, collaboration, budgeting, and quality assurance. Automatic Version Control and Markups Supports automatic version control and markups to track changes and revisions efficiently.

Construction Management 98

Construction Management Building Information Modeling (BIM) Schedule Management Real Estate Development 98

CCR Magazine

FEBRUARY 28, 2024

These aggregates typically encompass materials such as sand, gravel , crushed stone, and recycled concrete, collectively contributing to enhancing the strength, durability, and overall quality of construction endeavors. Modern testing methods and equipment are being employed to maintain product quality.

Infrastructure Development 59

Infrastructure Development Quality Assurance Quality Control Building Automation 59

CCR Magazine

DECEMBER 15, 2023

Unlike its more celebrated cousin, Delta-9 THC, which is the psychoactive compound present in abundance in the cannabis plant , Delta-8 THC also occurs naturally in the cannabis plant, albeit this time at a relatively lower concentration. Budpop stands out for its quality, honesty, and wide choice of products that suit unique tastes.

Quality Assurance 52

Quality Assurance Quality Control Controls Manufacturing Building Controls 52

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 59

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 59

iField Smart

FEBRUARY 16, 2023

Learn how new field processes and tech can be a significant driver to producing high-quality projects and winning more work. Closely connected, budget, schedule, and quality are considered the pillars to realize a winning construction project. Nevertheless, “project quality” has a greater impact after completion and during handover.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Quality Control Inspection Schedule Management 52

Autodesk Construction Cloud

JUNE 6, 2022

But it’s worth noting that these challenges also present tremendous opportunities for professionals who want to grow their careers. Led by Esteban Corrales , Manager of Technical Solutions at Autodesk, you’ll learn how to break down communication silos, streamline information flow, and control costs like a boss. Take Class. Take Class.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Project Management Consulting Project Management Quality Control 52

UK Construction Blog

JANUARY 25, 2025

A skills gap presents an opportunity for contractors to innovate and adapt. They’re a German manufacturer with a history going back to 1872 that makes quality, custom-built windows for residential and commercial projects. Their energy efficient windows are precision-engineered with quality materials.

HVAC System Installation 52

HVAC System Installation Building Materials Manufacturing Building Performance Measurement Energy Efficiency 52

Job Order Contracting

MARCH 14, 2017

Lean construction techniques are central to improving quality, timeliness, satisfaction, and lowering costs. Owner must provide value by sharing knowledge and collaborating in a timely manner with all service providers from concept through close-out, and not engage in excessive management and control. Focus upon Outcomes. White Papers.

Lean Construction 40

Lean Construction Integrated Project Delivery (IPD) Quality Assurance Quality Control 40

CCR Magazine

OCTOBER 15, 2024

Construction Mockups and Testing A presentation entitled “Construction Mockups & Testing | Overview, Trends, and Best Practices” was led by Christopher Grey, a principal in the Simpson Gumpertz & Heger ( SGH , [link] Building Enclosures Division in Boston. They are not just a quality assurance program,” said Grey.

Building Performance Measurement 52

Building Performance Measurement Quality Assurance Wall Systems Building Materials 52

Stok

APRIL 25, 2023

M&V, MBCx, WTF: Building Performance Monitoring as a Means to Achieve Decarbonization Goals This blog post was co-authored by Stok’s Ally Duncan and Jessica Shaw , summarizing their presentation at AEE West 2023. Controls programming will require calculations to remove the outlying circuit and separate it by end use once more.

Building Performance Measurement 98

Building Performance Measurement HVAC System Installation Electrical Systems HVAC Systems 98

Stok

APRIL 25, 2023

This blog post was co-authored by Stok’s Ally Duncan and Jessica Shaw , summarizing their presentation at AEE West 2023. HVAC air and water side, plumbing, lighting system, automated plug load systems, air quality data, occupancy data) that communicate back to the building automation system (BAS).

Building Performance Measurement 98

Building Performance Measurement HVAC System Installation Electrical Systems HVAC Systems 98

CCR Magazine

FEBRUARY 20, 2024

Well-designed metal ductwork is crucial for managing airflow and maintaining good indoor air quality in modern buildings. Supporting Components In addition to the main duct runs transferring air to diffusers, properly engineered systems include volume control dampers, turning vanes, access doors, support hangers, and insulation.

HVAC System Installation 52

HVAC System Installation HVAC Systems Steel Fabrication Quality Control 52

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 52

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 52

Construction Specifier

JUNE 5, 2024

The architectural specification is a key document controlling these risks from the start of project planning, and selecting fluid-applied air and water-resistive barriers presents a host of benefits for installers, owners, and occupants. This also means more installers and contractors on site for installation purposes.

Building Code Compliance 59

Building Code Compliance HVAC System Installation Renewable Energy Systems Building Materials Manufacturing 59

Construction Specifier

OCTOBER 1, 2024

Curtain wall systems are ever present in today’s commercial construction marketplace. Cost Control: By involving contractors in design discussions, cost implications of design choices can be addressed in real time, preventing costly changes during construction. to study the quality and finish of materials proposed (Figure 5).

Wall Systems 104

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 104

Rapport3

FEBRUARY 28, 2019

Resource planning should never be isolated from cost calculation, so ensure that the project management system presents profit or loss alongside the resource grid. Quality Assurance Quality assurance is an essential aspect to any project.

Project Management 52

Project Management Quality Assurance Schedule Management Architecture 52

Rapport3

FEBRUARY 28, 2019

Resource planning should never be isolated from cost calculation, so ensure that the project management system presents profit or loss alongside the resource grid. Quality Assurance Quality assurance is an essential aspect to any project.

Project Management 52

Project Management Quality Assurance Schedule Management Architecture 52

CCR Magazine

JULY 23, 2024

It’s essential to work with a reputable pest control company to ensure the problem is eradicated safely and effectively. In addition to doing pest control, it’s important to repair any damage they may have caused. Showcase these positive aspects through high-quality photos, virtual tours, and engaging property descriptions.

Property Management 52

Property Management Building Controls Quality Control Inspection 52

Job Order Contracting

MAY 9, 2017

As a real proper owner, facilities management professional, or construction contractor, is important to review internal policies, procedures and controls with respect to your JOC Program and Estimating Construction Costs for Job Order Contracts : Are there areas of risk and/or compliance issues? Higher construction quality.

Estimating 40

Estimating Contracts Project Management Consulting Cost Control 40

Rapport3

JULY 14, 2021

A RAG-style resource grid is always available to present team availability based on leave and existing commitments. Profit or loss is continuously presented, allowing the user to witness the financial implications of their resource changes. True to Rapport3’s core function, resource planning is never done in isolation from costs.

Project Management 52

Project Management Architecture Quality Assurance Change Management 52

Rapport3

JULY 14, 2021

A RAG-style resource grid is always available to present team availability based on leave and existing commitments. Profit or loss is continuously presented, allowing the user to witness the financial implications of their resource changes. True to Rapport3’s core function, resource planning is never done in isolation from costs.

Project Management 52

Project Management Architecture Quality Assurance Change Management 52

Construction Specifier

FEBRUARY 10, 2025

1 Water is part of one component, making moisture control critical during application. Relative humidity Ambient humidity awareness and control are also important, and ccSPF must not be installed if the ambient temperature is near (typically within five percent) the dewpoint.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Performance Measurement Controls Manufacturing Building Materials 52

Job Order Contracting

OCTOBER 25, 2017

Historical and planned budgets also are evaluated to assure long term, consistent execution of the JOC program. A review of owner staff personnel is needed to assure proper availability to support both the technical (facility management/engineering) and purchasing administrative elements of the JOC program. Capabilities Being Acquired.

Contracts 40

Contracts Quality Assurance General Contracting Quality Control 40

Construction Specifier

DECEMBER 18, 2024

Probes installed in concrete truck drums ensure mix consistency by monitoring variables such as slump, temperature, and water-to-cement ratio, enhancing quality control and reducing carbon impact. Maturity sensors were part of the thermal control plan for a mass concrete pour in Edmonton, Alberta, Canada.

Concrete Pouring 52

Concrete Pouring Environmental Impact Assessment Building Performance Measurement Building Materials Manufacturing 52

Fleis & VandenBrink

SEPTEMBER 15, 2023

Internal quality assurance/quality control (QA/QC) reviews are completed at regular intervals throughout the design. It also presents an opportunity to complete utility upgrades, accommodate traffic changes , and improve the overall safety of the road. Internal peer review. Why Choose Fleis & VandenBrink?

Engineering 52

Engineering Cost Control Quality Control Quality Assurance 52

CivilJungle

APRIL 27, 2023

Thanks to the dual stacking of the burners, the temperature may be precisely controlled from a rapid boil to a slow simmer. However, the quality of construction is difficult to evaluate objectively. The quality of a Wolf range’s construction can only be appreciated through hands-on testing.

Quality Control 52

Quality Control Electrical Systems Cost Control Quality Assurance 52

UK Construction Blog

FEBRUARY 6, 2025

The post Read the Latest News on Stark UK joins to Combat Building Exploitation, the First-ever NHBC Affordable Housing Innovators Event, an Industrial Contract Worth 20 Million, and the First Remotely Controlled Tower Crane in the UK appeared first on UK Construction Blog. Compared to 0.92

Building Controls 52

Building Controls Contracts Quality Control Real Estate Development 52

Buildern

NOVEMBER 21, 2024

The building and infrastructure created from it give off a total of 40% of the carbon emissions worldwide, besides accounting for contributing 23% to the overall air pollution present in our environment. 8 Workforce Upskilling and Transformation The transition to technology demands a different skillset.

Renewable Energy Systems 52

Renewable Energy Systems Building Materials Manufacturing Building Information Modeling (BIM) Modular Construction 52