Revit OpEd

JULY 19, 2012

These adjustments change the 3D model, not just the 2D plan-view. Note the two “wall closure” parameters (shown below) need to be “locked” so they stay positive (in the correct direction) when the host wall thickness changes. Builds and Updates. Blog Listing - BIM and Misc. Site Information.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Wall Systems Project Management Consulting Site Planning 72

Extranet Evolution

APRIL 13, 2023

An interoperability code of practice for technologies in the built and managed environment is set to be launched on Monday 17 April in London. Poor interoperability of information has been a perennial problem for professionals in architecture, engineering, construction and asset operation and maintenance for decades.

Building Information Modeling (BIM) 69

Building Information Modeling (BIM) Collaboration Government Works Surveying 69

Building Radar

JULY 15, 2020

The Development of New Processes and Programs is Picking up Speed in Germany Digital processes and tools are changing all areas of our lives at a rapid pace. In any case, this is certain: Digitization on the building site and in the offices for planning and administration must and will progress faster.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Automation Site Planning Cost Control 52

Revit OpEd

SEPTEMBER 6, 2012

In this image the massing has been created aligned with the "site" but weve realized that it would be easier to document if Project North were aligned along one building edge. As I wrote in my reply there, RTN is sleight of hand while RPN is really altering the entire model and related views to change orientation. Older Post.

Building Information Modeling (BIM) 60

Building Information Modeling (BIM) Project Management Consulting Project Management Architecture 60

Revit OpEd

JULY 27, 2012

I was musing about a recent conversation where one guys position was that BIM is hype, unnecessary and worse really just being foisted upon our profession in a scheme to get more money from "us". It seems to me this notion of using Revit (BIM) and "us" isnt all that different. Friday, July 27, 2012. Due Diligence. The soluton?

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Revit OpEd

APRIL 9, 2012

I included the following tips and advice (edited a little in this version) in a door tutorial I wrote for my Autodesk University 2005 lab called "Autodesk Revit Building Family Editor: From the Beginning". Change the scale of the view to make it easier to constrain, select geometry. Skin - solids/voids and model/symbolic lines.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Wall Systems 72

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. Revit warns us that they have been deleted from the model but they are still listed in schedules. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Comments: Comments are moderated to manage spamming.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

APRIL 3, 2012

The opening families are still assigned to the category Generic Model. As for other subtle library changes we will now find some categories separated by Internal and External, interesting language choice versus Interior and Exterior. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Older Post.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Revit OpEd

APRIL 23, 2012

The problem with pinning it down is that as soon as I think Ive got it, I change it a little and then Revit doesnt complain about importing the file. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Comments: Comments are moderated to manage spamming. Copyright Information. ► 2004. (2).

Building Information Modeling (BIM) 63

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 63

Revit OpEd

SEPTEMBER 12, 2012

It was meant to make it simple to alter the appearance of our model to be more in sync with what a structural engineer wants to see. When Mechanical is assigned Revit changes the nature of what plan and reflected plan mean. They were there but the discipline change altered how Revit calculates the display of the elements.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

APRIL 18, 2012

The whole model is still there, just not visible, thatll provide some relief for performance sake. Recently I was working with a team, their building is a million square feet overall, and opening the whole file took considerably longer than selectively focusing on a single sectors workset. Building Shell or Envelope. Wing South.

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Building Controls 65

Building Radar

JANUARY 14, 2020

Building planning: digital for optimized workflow 2. Project management software: smart tools for fast teams 4. IoT: building with wireless intelligence 5. BIM: Solving problems proactively and reducing costs 7. Mega-trend in the construction industry: the 3D-printed building 11.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Site Planning Building Materials 52

Revit OpEd

SEPTEMBER 19, 2012

They recently announced that theyre offering a software solution to bring 3D as-built models of pipes and other cylindrical MEP elements directly into Revit. However, the accuracy and utility of the model is greatly enhanced by the use of custom families. Builds and Updates. Blog Listing - BIM and Misc. Site Information.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Architecture Change Management 56

Revit OpEd

APRIL 19, 2012

If changed I suspect people would have less trouble deciding which function is appropriate. It cannot be that difficult of change to make for Autodesk either. What you are suggesting is a much bigger change. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Copyright Information.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Flooring Systems Ceiling Systems 53

Revit OpEd

AUGUST 26, 2012

This information has been sitting in my inbox for a week now. Autodesk Vasari Beta 1 is a slimmed down version of Revit 2013 focusing on conceptual modeling and early analysis. It also encompasses some changes to the user interface. Detailed BIM modeling tools have been removed. Builds and Updates.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Architecture Project Management 56

Revit OpEd

JULY 20, 2012

A few changes have been made this year as to how the updates are accessed. Improves section creation within a project with linked model. Improves stability when enabling “Show Analytical Model Categories in this View” when the Warning dialog is open. Builds and Updates. Blog Listing - BIM and Misc.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

AUGUST 18, 2012

I used a pair of model lines (assigned to Invisible) to govern the location of the arc and line endpoints. It also means that the family will break if one of these segments is flex too far, assuming the changes result in a zero length segment. What you describe as working doesn't work on the model lines in my example.

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Government Works Architecture Change Management 58

Revit OpEd

APRIL 17, 2012

I think that it is natural to be inclined toward building very parametric families. However, as fast as some design solutions change a single solution family might get built quicker than the one we make trying to anticipate how it might change. As soon as we see what is possible, why not? 11:20 AM. stimmo520 said.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Change Management Schedule Management 56

Revit OpEd

APRIL 12, 2012

99 that they say will never change. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Comments: Comments are moderated to manage spamming. Copyright Information. Refer to Autodesks own web site and product pages for specific trademark and copyright information. ► 2004. (2).

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Wall Systems Schedule Management 56

Revit OpEd

APRIL 2, 2012

They are a panel because Revit needs to keep their width and height flexible, to accommodate any changes we might make. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Comments: Comments are moderated to manage spamming. Copyright Information. Wall Floor Interaction and Linked Models.

Wall Systems 49

Wall Systems Building Information Modeling (BIM) Schedule Management Architecture 49

Building Information Management

JULY 27, 2016

Masterformat is a multiple level data structure consisting of numbers and titles/descriptions used to organize information by “work results” or construction practices. The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Building Information Management

MARCH 19, 2013

BIM is the life-cycle management of the built environment supported by digital technology. BIM is the life-cycle management of the built environment supported by digital technology. While Value Management is used as term in this paper, it is arguably interchangeable with Capital Planning and Management (CPMS).

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Facility Management Project Management Project Management Consulting 53

Building Information Management

JULY 27, 2016

Masterformat is a multiple level data structure consisting of numbers and titles/descriptions used to organize information by “work results” or construction practices. The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45