Job Order Contracting

DECEMBER 13, 2020

A great deal of research has been done one why projects fail. Instead, most of the performance variations are caused by the system, of which those people are but a part. People can’t perform better than the system allows W. People can’t perform better than the system allows W.

Project Management Consulting 91

Project Management Consulting Change Management Project Management Schedule Management 91

Revit OpEd

SEPTEMBER 18, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. ► 2005. (73). ► December 2005. (7). ► November 2005. (14).

Project Management Consulting 80

Project Management Consulting Architecture Schedule Management Change Management 80

Revit OpEd

APRIL 9, 2012

I included the following tips and advice (edited a little in this version) in a door tutorial I wrote for my Autodesk University 2005 lab called "Autodesk Revit Building Family Editor: From the Beginning". This was a bug and has supposedly been fixed in the releases following 2005.]. Monday, April 09, 2012. 9:58 PM.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Wall Systems 72

Revit OpEd

SEPTEMBER 10, 2012

Posts from 2005. 2005) What are parameters and why should I care? 2005) Sharing Parameters - An Overview. 2005) Shared Parameters - Part 3. 2005) Shared Parameters - Part 4. 2005) Making a Shared Parameter File. 2005) When is an Instance really a Type? 2005) Ignore Good Advice. ► 2005. (73).

Project Management Consulting 63

Project Management Consulting Architecture Change Management Structural Systems 63

Revit OpEd

MAY 9, 2012

Should I Use Revit for this Project? the architect isnt using Revit, the engineers arent using Revit, we dont really need 3D for this project, this project doesnt have the margin, this project is fast track, this project isnt big enough, this project is too big". Is this our first project using Revit? -

Building Information Modeling (BIM) 61

Building Information Modeling (BIM) Project Management Consulting Building Performance Measurement Project Management 61

Revit OpEd

APRIL 6, 2012

IsReference settings break down like this: Not a Reference - ignored by Revit in the project environment, still useful in a family to create "the bones". Weak Reference - Seen in Project by dimensions, align tool, Revit favors Strong over Weak Strong Reference - Seen in project by dimensions, align tool and Revit sees these first.

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Project Management Consulting Architecture Building Codes 74

Revit OpEd

AUGUST 15, 2012

Using two points in the family and using "chain" in the projects provides more flexibility. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. ► 2005. (73). ► December 2005.

Project Management Consulting 81

Project Management Consulting Site Planning Architecture Building Permits 81

Revit OpEd

JULY 20, 2012

For Autodesk Revit Architecture, Autodesk Revit Structure, and Autodesk Revit MEP, you can find the update in the Data & Downloads > Updates section of each product page: Autodesk Revit Architecture 2013 UR1. Autodesk Revit Structure 2013 UR1. Improves stability when opening projects from previous versions of Revit.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

SEPTEMBER 5, 2012

It is the formal repackaging of the Autodesk Labs Project Spark. Sure, there were projects or design considerations that the missing features would prove frustrating but a single seat of full Revit would probably have covered it, collaboration with outside parties that is. Comments: Comments are moderated to manage spamming.

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Project Management Consulting Architecture Building Design 74

Revit OpEd

JULY 19, 2012

Layers) for the host wall in a project. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. ► 2005. (73). ► December 2005. (7). ► November 2005. (14). Egress Paths.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Wall Systems Project Management Consulting Site Planning 72

Revit OpEd

SEPTEMBER 3, 2012

There should never be any identical usernames working on a workset project. When nobody else is working on the project you can open a central file and pretend to be the ill mannered users that havent relinquished elements properly. Comments: Comments are moderated to manage spamming. ► 2005. (73). Jason Bailly.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Architecture 72

Revit OpEd

MAY 4, 2012

Starting Projects - Two Pieces of Advice. Project Coordination - Early Days. CAD Surveys and your Revit Project. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. ► 2005. (73).

Project Management Consulting 63

Project Management Consulting Architecture Ceiling Systems Project Management 63

Revit OpEd

MARCH 30, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Kiwi Codes - Project Browser for 2013. Revit Level Elevations Project and Shared. Project Browser Interferes with Plotting and Expor.

Project Management Consulting 66

Project Management Consulting Architecture Permits Schedule Management 66

Revit OpEd

SEPTEMBER 4, 2012

The first button is effectively acknowledging the changed family but preserving values that we may have entered or altered in the project, they may be different from the original family. Said another way the project is correct (the project version of the family). Comments: Comments are moderated to manage spamming.

Project Management Consulting 63

Project Management Consulting Change Management Architecture Project Management 63

Revit OpEd

MARCH 30, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Kiwi Codes - Project Browser for 2013. Revit Level Elevations Project and Shared. Project Browser Interferes with Plotting and Expor.

Project Management Consulting 65

Project Management Consulting Schedule Management Architecture Property Management 65

Revit OpEd

MAY 14, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Should I Use Revit for this Project? ► 2005. (73). ► December 2005. (7). ► November 2005. (14). Egress Paths.

Ceiling Systems 68

Ceiling Systems Building Information Modeling (BIM) Project Management Consulting Flooring Systems 68

Revit OpEd

SEPTEMBER 14, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. ► 2005. (73). ► December 2005. (7). ► November 2005. (14).

Project Management Consulting 68

Project Management Consulting Architecture Change Management Schedule Management 68

Revit OpEd

MAY 16, 2012

Then again I could just select multiple views in the project browser and apply them. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Should I Use Revit for this Project? ► 2005. (73).

Project Management Consulting 65

Project Management Consulting Architecture Ceiling Systems Risk Management 65

Revit OpEd

SEPTEMBER 8, 2012

Id never tried to move either the Survey or Project Base Point symbols "up" before so it took me by surprise that it could be done. Labels: Project Base Point , Survey Point , Troubleshooting. Comments: Comments are moderated to manage spamming. In-Place Massing and Project Orientation Inequity. ► 2005. (73).

Surveying 61

Surveying Project Management Consulting Architecture Project Management 61

Revit OpEd

APRIL 18, 2012

How tangible or detectable that performance gain really is will depend greatly on the scope of your project. This means each project should have its own workset structure based on its own conditions. There may be some worksets that many projects have in common, but it isnt the same thing as a Layer standard. Wing South.

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Building Controls 65

Revit OpEd

SEPTEMBER 6, 2012

In-Place Massing and Project Orientation Inequity. Ive always stressed that people should start a project without being concerned about site alignment immediately. A recent post at RevitForum.org underscores that bias when it asked if the two project orientation tools seem to work differently? Thursday, September 06, 2012.

Building Information Modeling (BIM) 60

Building Information Modeling (BIM) Project Management Consulting Project Management Architecture 60

Revit OpEd

SEPTEMBER 27, 2012

In the project environment we cant change the position of elements by selecting a dimension string first and then editing the value. In the project we keep stressing that we must select the element and then edit the dimensions. Comments: Comments are moderated to manage spamming. ► 2005. (73). ► August 2005.

Project Management Consulting 66

Project Management Consulting Change Management Architecture Project Management 66

Revit OpEd

SEPTEMBER 9, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. ► 2005. (73). ► December 2005. (7). ► November 2005. (14).

Project Management Consulting 63

Project Management Consulting Architecture Change Management Structural Systems 63

Revit OpEd

SEPTEMBER 21, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. ► 2005. (73). ► December 2005. (7). ► November 2005. (14).

Project Management Consulting 61

Project Management Consulting Architecture Change Management Structural Systems 61

Revit OpEd

SEPTEMBER 24, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. ► 2005. (73). ► December 2005. (7). ► November 2005. (14).

Project Management Consulting 61

Project Management Consulting Architecture Change Management Building Design 61

Revit OpEd

SEPTEMBER 26, 2012

Working with a client the last couple evenings I found a quirky condition with a column family that has a nested detail component to manage masking the way they like. Well Ive manage to break it, thats something I suppose. Comments: Comments are moderated to manage spamming. In-Place Massing and Project Orientation Inequity.

Project Management Consulting 63

Project Management Consulting Change Management Site Planning Architecture 63

Revit OpEd

MAY 18, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Should I Use Revit for this Project? ► 2005. (73). ► December 2005. (7). ► November 2005. (14). Egress Paths.

Project Management Consulting 58

Project Management Consulting Architecture Ceiling Systems Risk Management 58

Revit OpEd

SEPTEMBER 7, 2012

Revits "system" parameters like Width and Height for some components (like Doors or Windows) just work automatically. Rather than continuing to lament the situation this post is intended to provide one solution to getting "foreign" content to work within your existing project(s) and template(s). ► 2005. (73). Egress Paths.

Project Management Consulting 61

Project Management Consulting Schedule Management Architecture Mapping 61

Revit OpEd

MARCH 30, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Kiwi Codes - Project Browser for 2013. Revit Level Elevations Project and Shared. Project Browser Interferes with Plotting and Expor.

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Project Management Consulting Architecture Schedule Management 58

Revit OpEd

APRIL 11, 2012

When we have architecture and structure in separate Revit models we end up with somewhat clumsy graphics in wall sections. This is more pronounced if the structural slab is in the structure model only. It's a little easier to manage than reveals. Managing all the reveals could be a coordination nightmare.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Project Management Consulting Flooring Systems 53

Revit OpEd

JUNE 14, 2012

I can have a relatively small project site survey but far from origin and end up with Revit using Auto - Center to Center to place it. Move the files into position keeping them all near the Revit project file origin. For the snapping issue, i import my cad in a 2d drafting element family, make no modification, push it in the project.

Surveying 72

Surveying Building Information Modeling (BIM) Project Management Consulting Architecture 72

Revit OpEd

SEPTEMBER 11, 2012

It can be seen from within a project but not scheduled or tagged unless it is a built in parameter like those listed under the Identity group (and provided for us by Autodesk). Consider that a Project Parameter is part of a project and applied to categories of families so that it can be scheduled, but NOT tagged. ► 2005.

Project Management Consulting 56

Project Management Consulting Schedule Management Project Management Architecture 56

Revit OpEd

AUGUST 3, 2012

Same for the right click option over the Sheet category in the project browser. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. ► 2005. (73). ► December 2005. (7). at 8:00 AM.

Project Management Consulting 56

Project Management Consulting Architecture Building Design Structural Systems 56

Revit OpEd

SEPTEMBER 12, 2012

The concept of View Discipline appeared with Revit Structure. It was meant to make it simple to alter the appearance of our model to be more in sync with what a structural engineer wants to see. Apart from the automatic graphically biased changes they make, they really just help us segregate views in the project browser.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

MAY 2, 2012

For example it could happen because the projects server is down, a router is malfunctioning, your network cable was unplugged by the cleaning crew and so on. When you open a Revit project, that has had worksets enabled, Revit "talks" with the central file. Comments: Comments are moderated to manage spamming. Working at Risk.

Project Management Consulting 60

Project Management Consulting Risk Management Site Planning Architecture 60

Revit OpEd

SEPTEMBER 13, 2012

I can work in a central file as long as necessary, as long as nobody else is working on the project in local files too. I've found that if a user is trying to open a workshared project at the same time as another user is synchronizing with the central file, the create new local checkbox is greyed out. ► 2005. (73).

Project Management Consulting 63

Project Management Consulting Architecture Change Management Project Management 63

Revit OpEd

JUNE 11, 2012

To make this possible you need to edit the walls structure and select a layer to unlock, like this: 1 - Click Modify, 2 - Select the edge of a layer, 3 - Unlock the padlock. Could it be that the wall is not being cut in the ceiling plan view and the multiple lines are actually projection lines? ► 2005. (73). Egress Paths.

Wall Systems 56

Wall Systems Ceiling Systems Site Planning Project Management Consulting 56