Remove Approvals Remove Electrical Systems Remove Plumbing Systems
article thumbnail

Black Buffalo Hits Print on First Internationally Code Compliant 3D-Printed Home

The Pro Builder

The first of its kind in the world, the LoMa home utilizes technology that makes it the first International Code Council Evaluation Service (ICC-ES)-approved home to use load-bearing 3D-printed walls. “We The NEXCON Printer is a modular printing system that, upon set up, can print the walls of a 40-foot by 40-foot home in under 30 hours.

article thumbnail

How to Choose Trusted Tiny Home Builders in Queensland: Expert Guide 2025

UK Construction Blog

Their expertise covers unique building techniques, system planning, and tiny house requirements. The Building Act 1975 applies to fixed tiny homes, and builders must follow the Building Code of Australia and plumbing regulations. Building codes and regulations Fixed tiny homes need building and plumbing approvals before installation.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Top 10 Construction Defects: Prevent These Costly Building Mistakes

UK Construction Blog

The most dangerous defects include structural issues (foundation cracks, wall collapses), water infiltration, electrical/plumbing failures and HVAC system problems, which often remain hidden for years. Examples include improperly installed plumbing, electrical wiring errors, and poor finishes.

article thumbnail

Planning a House Extension? Here’s What to Expect From Start to Finish

UK Construction Blog

Phase 3: Approvals and Permits (1-3 Months) Development Application (DA) Most substantial extensions require council approval through a Development Application process. Phase 3: Approvals and Permits (1-3 Months) Development Application (DA) Most substantial extensions require council approval through a Development Application process.

article thumbnail

Boston Contractor Licensing Guide 2024: Steps, Permits, and State Differences

Contractors Liability Blog

Specialty Contractors Fields such as plumbing, HVAC, and electrical work need specific licenses that Massachusetts boards oversee, but Boston might ask for extra local permits for these trades. Projects that use eco-friendly systems or materials often need permits. May impact future permit and license approvals.

Permits 52
article thumbnail

Construction Purchase Order: Definition, Workflow, and Benefits

Buildern

In the office, it integrates with the construction budgeting process , supports construction forecasting, and helps enforce approval workflows. For smaller teams or growing businesses, incorporating POs into Buildern’s structured system is often the first step toward full construction project management software adoption.

article thumbnail

The three Ps of prefabricated EIFS: Preparation, production, placement

Construction Specifier

Babaian Photos and illustrations courtesy Simpson Gumpertz & Heger (SGH) In its most general form, exterior insulation and finish systems (EIFS) consist of expanded polystyrene (EPS) insulation board coated with a reinforced polymer-modified cementitious base coat and a polymer-based finish coat. By Alex Ardelean, Elizabeth V.