article thumbnail

Barrier breakthroughs: Achieving airtightness in modern construction

Construction Specifier

Improving building enclosure performance While energy efficiency might initially suggest well-insulated walls and efficient HVAC systems, controlling air leakage can be just as critical. Uncontrolled air movement through penetrations in the building enclosure can increase energy costs as HVAC systems work harder to condition the air.

article thumbnail

Planning a House Extension? Here’s What to Expect From Start to Finish

UK Construction Blog

Phase 3: Approvals and Permits (1-3 Months) Development Application (DA) Most substantial extensions require council approval through a Development Application process. Phase 3: Approvals and Permits (1-3 Months) Development Application (DA) Most substantial extensions require council approval through a Development Application process.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

The three Ps of prefabricated EIFS: Preparation, production, placement

Construction Specifier

Babaian Photos and illustrations courtesy Simpson Gumpertz & Heger (SGH) In its most general form, exterior insulation and finish systems (EIFS) consist of expanded polystyrene (EPS) insulation board coated with a reinforced polymer-modified cementitious base coat and a polymer-based finish coat. By Alex Ardelean, Elizabeth V.

article thumbnail

How to Choose Trusted Tiny Home Builders in Queensland: Expert Guide 2025

UK Construction Blog

Their expertise covers unique building techniques, system planning, and tiny house requirements. Building codes and regulations Fixed tiny homes need building and plumbing approvals before installation. Non-sewered areas require extra certifications for on-site wastewater treatment systems. Maximum height: 4.3m

article thumbnail

Top 10 Construction Defects: Prevent These Costly Building Mistakes

UK Construction Blog

The most dangerous defects include structural issues (foundation cracks, wall collapses), water infiltration, electrical/plumbing failures and HVAC system problems, which often remain hidden for years. These systems run throughout buildings, making repairs particularly invasive and expensive.

article thumbnail

Yellowstone River Bridge Sits Tall at Top of Canyon to Improve Safety, Access and Views

ENR Construction

National Park system would come with its own unique set of challenges. We had to have a liquid cooling system for the concrete and monitor the temperature to make sure it was curing properly.” —Jon Wadsworth “We use them a lot in Utah and Colorado, but we had to get approval from the Federal Highway Administration to use them.

article thumbnail

The Ultimate Guide to Damp Proofing: Prevention, Diagnosis & Treatment in 2025 for Homeowners and Professionals

UK Construction Blog

In areas with frequent water penetration, vapour-permeable renders balanced with waterproof layers help walls ‘breathe’ whilst preventing internal dampness. For listed buildings or special properties, exemption processes exist but alternative moisture solutions must be formally justified and approved.