article thumbnail

Norwood lands cleanroom deal from Bouygues at new eye centre

Construction Enquirer

Their expert team will also play a pivotal role in supporting the commissioning and validation of this critical healthcare space. Neil Pixsley, Project Director at Bouygues UK added: “We’re looking forward to building on our successful partnership with Norwood for the cleanroom at Oriel.

article thumbnail

Design Draw Build won the Honor Award in AIA California’s 2024 Architecture at Zero competition.

CCR Magazine

Architect-led design-build firm Design Draw Build (DDB) received the highest professional honor award from The American Institute of Architects (AIA) Californias 2024 Architecture at Zero Competition for the design of Agualta STEAM Engine. says DDB Founder and Principal Tyler Kobick, AIA.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Navigating the UK’s 2025 Building Regs: What Contractors Need to Know

UK Construction Blog

The post Navigating the UKs 2025 Building Regs: What Contractors Need to Know appeared first on UK Construction Blog. Key Points The 2025 UK Building Regulations, under the Future Homes Standard, aim to reduce carbon emissions from new homes by 75-80% compared to 2013 standards, focusing on energy efficiency and low-carbon heating.

article thumbnail

Leers Weinzapfel’s Forest Service Museum Begins Construction

CCR Magazine

Its design is inspired by the qualities of the USFS forests as valuable recreational and economic resources across the nation’s history and also echoes features of the surrounding mountain landscape. The unique two-way span capability of MPP is exhibited in the folded roof geometry over the building’s south-facing portico and main lobby.

article thumbnail

SANY eMixer: Leading the charge

Roads Online

Their latest trial of the first Australian Design Rules (ADRs) approved and road registered 100 per cent electric truck mixer is reflecting this push. The SANY eMixer was the first ADR (Australian Design Rules) approved 8×4 rigid chassis in Australia to be fully electric powered, using CCS2 DC charginginfrastructure.

article thumbnail

The three Ps of prefabricated EIFS: Preparation, production, placement

Construction Specifier

on the exterior of the building, which increases the effective thermal resistance of the assembly. Prefabricated construction is usually conducted through delegated design and affects many project stakeholders, so it is important to have all parties aligned as early as possible during design.

article thumbnail

Lintec & Linhoff: From Africa to Australia

Roads Online

However, it presented a challenge for Lintec & Linnhoff as the company had to install and commission 100 per cent remotely. Despite this, the project team successfully overcame these challenges, as the plants design made it easier and faster to install compared to a conventional plant. The 2023-24 budget allocated $40.8