Construction Specifier

NOVEMBER 28, 2024

By Amy Becker Photo courtesy Fenestration and Glazing Industry Alliance (FGIA) Specifiers and design professionals should always consider seismic performance attributes for buildings in areas that previously have experienced the damaging effects of earthquakes. Building codes are adopted with the intent to preserve life and safety.

Building Performance Measurement 52

Building Performance Measurement Wall Systems Building Code Compliance Structural Systems 52

UK Construction Blog

MARCH 14, 2025

The post The Ultimate Guide to Air Quality Monitoring: Protecting Health & Environment appeared first on UK Construction Blog. Air quality monitoring is the continuous measurement of pollutants and criteria air contaminants that affect our daily lives. Every breath you take matters.

Environmental Impact Assessment 52

Environmental Impact Assessment Quality Assurance Quality Control Building Performance Measurement 52

CCR Magazine

JUNE 11, 2025

Preventive repair gives homeowners greater control of plumbing and also prevents the shock of burst pipes or flooded basements, which saves money and time in the long run. Proper materials and qualified workers ensure quality repairs. Ensure Safe Water Quality Home water safety is a must.

Plumbing 52

Plumbing Maintenance Plumbing Systems Piping Installation 52

iField Smart

APRIL 2, 2024

The Role of As-Built Drawings in Quality Assurance and Quality Control As-built drawings are accurate and exhaustive construction documents that portray the final state of construction. This leads to greater quality assurance and control for construction projects.

Quality Assurance 95

Quality Assurance Quality Control Building Code Compliance Cost Control 95

Civil + Structural Engineer

APRIL 14, 2023

. – After a long, stormy winter, drivers are faced with dodging potholes or suffering the consequences of damage to their vehicles, but a first-of its-kind quality control tool may help increase the quality of pavement and keep those potholes, ruts and cracks from forming.

Quality Control 130

Quality Control Quality Assurance Building Performance Measurement Controls Manufacturing 130

BDC Network

SEPTEMBER 26, 2024

Dean Lewis, Graham Finch, and David Simkins Contractors Mass Timber Moisture Protection Sustainable Development Sustainable Design and Construction Mass timber has gained popularity as a building material praised for its sustainability and aesthetic appeal. Here are five tips for successful water mitigation in mass timber construction.

Building Performance Measurement 98

Building Performance Measurement Quality Assurance Environmental Impact Assessment Quality Control 98

Autodesk Construction Cloud

NOVEMBER 17, 2022

The Building Quality Assurance Act, Wet Kwaliteitsborging voor het Bouwen , is set to be introduced in mid 2023 and will radically change the building system regulations for the Dutch built environment. Download the full white paper, How the Dutch construction industry can prepare for The Building Quality Assurance Act.

Quality Assurance 52

Quality Assurance Environmental Impact Assessment Quality Control Building Performance Measurement 52

iField Smart

APRIL 30, 2024

Field inspections are pivotal to ensure construction activities are carried out within regulations and standards for the building process to continue without any issues. Top 10 challenges for building inspectors, project managers, and quality control managers with legacy field inspection techniques.

Inspection 104

Inspection Building Code Compliance Quality Assurance Building Automation 104

The Pro Builder

SEPTEMBER 10, 2023

But while the efficiency of heating, ventilation, and air conditioning (HVAC) equipment has improved across the board, improper installation or commissioning can result in HVAC system faults that compromise HVAC performance and reduce energy efficiency. Department of Energy's (DOE) Building America program , points out. Yuill asks.

HVAC Systems 130

HVAC Systems HVAC System Installation Renewable Energy Systems Energy Efficiency 130

Stok

APRIL 25, 2023

M&V, MBCx, WTF: Building Performance Monitoring as a Means to Achieve Decarbonization Goals This blog post was co-authored by Stok’s Ally Duncan and Jessica Shaw , summarizing their presentation at AEE West 2023. However, because of how the M&V credit has evolved from LEED version 2.0

Building Performance Measurement 98

Building Performance Measurement HVAC System Installation Electrical Systems Energy Efficiency 98

Stok

APRIL 25, 2023

As building owners and occupiers adopt zero commitments and find their properties subject to energy performance and emissions regulations, the question becomes, ‘how can we achieve these ambitious reduction targets?’ However, because of how the M&V credit has evolved from LEED version 2.0

Building Performance Measurement 98

Building Performance Measurement HVAC System Installation Electrical Systems Energy Efficiency 98

Autodesk Construction Cloud

FEBRUARY 1, 2022

What it is, how it’s measured, why it matters, and how to improve it. Everything you need to know about construction quality and how to manage it. Quality is what separates the good from the bad. Both in our lives and in our work, quality is the defining factor in how we evaluate and are evaluated by others.

Construction Management 97

Construction Management Quality Assurance Closeout Quality Control 97

Job Order Contracting

MARCH 4, 2022

It has done virtually nothing to measurably impact the repair, renovation, maintenance, and construction of the built environment. Robust tools and processes have existing for decades that can assure quality repair, renovation, maintenance, and new builds are consistent delivered on-time and on-budget. Fully Compliant.

Integrated Project Delivery (IPD) 105

Integrated Project Delivery (IPD) Lean Construction Quality Assurance Procurement 105

Job Order Contracting

MAY 3, 2020

Strategic alignment (links between operational performance and strategic factors), and profitability/cost control and/or resource maximization are initial area of focus and should be regularly monitored. Key performance indicators (KPIs) and regular independent third-party audit are important tools.

Procurement 76

Procurement Lean Construction Building Performance Measurement Quality Assurance 76

CCR Magazine

OCTOBER 11, 2023

Whether for extensive renovation work, property valuation, or facility management purposes, performing an accurate measured building survey is an important part of understanding any real estate asset in London. Coordinating the Site Survey The first step in a measured building survey is careful planning and coordination.

Surveying 52

Surveying Building Performance Measurement Quality Assurance Building Information Modeling (BIM) 52

Construction Specifier

OCTOBER 1, 2024

Whether creating new architectural expressions or rehabilitating architecturally significant historic buildings, from stick-built to unitized, “off-the-shelf” commodity to custom bespoke systems, utilizing insulating glass units or opaque spandrel panels, simple flat or complex geometry; it seems the sky is the limit with curtain wall design today.

Wall Systems 104

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 104

iField Smart

MAY 21, 2024

Inspectors may overlook critical checkpoints or fail to adhere to regulatory standards, leading to compliance issues and quality discrepancies. The absence of standardized procedures also makes it challenging to benchmark performance, identify trends, and implement best practices across the organization.

Inspection 105

Inspection Construction Management Risk Management Quality Assurance 105

GCP Applied Technologies

DECEMBER 17, 2018

How two buildings in Seattle achieved high-strength concrete. The latest edition of "Design and Control of Concrete Mixtures" (DCCM) considers HSC to be at a "strength significantly beyond that used in normal practice.". This was surely the case for the Two Union Square building, in Seattle, Wash., Quality assurance.

Concrete Pouring 60

Concrete Pouring Quality Assurance Building Performance Measurement Quality Control 60

UK Construction Blog

JANUARY 25, 2025

The post Made-to-Measure Windows: A Time-Saving Solution Becoming Popular With UK Contractors appeared first on UK Construction Blog. The UK construction sector has a skills gap despite ambitious building targets. Built-to-measure windows are a quick solution, simplify installation, save on labour and improve building performance.

HVAC System Installation 52

HVAC System Installation Building Materials Manufacturing Building Performance Measurement Energy Efficiency 52

Civil + Structural Engineer

JUNE 10, 2024

Jeremy’s leadership qualities are also evident in his ability to inspire and motivate those around him. a civil engineering firm focused on sanitary sewer systems, as a stop-gap measure until she could find a career more suited to her structural engineering ambition.

Project Management Consulting 147

Project Management Consulting Public Works Environmental Impact Assessment Project Management 147

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

Job Order Contracting

MARCH 3, 2020

Consistent on-time, on-budget delivery of quality repair, renovation, maintenance, sustainability, and new construction projects is possible only when owners have the requisite levels of leadership and competency. Key performance indicators, KPIs, are used to define success for all. Project definition of the Scope of Work is critical.

Lean Construction 76

Lean Construction Integrated Project Delivery (IPD) Procurement Building Performance Measurement 76

Construction Specifier

SEPTEMBER 19, 2024

By Iltaz Alam and Marysusan Couturier Photo ©Chris Boswell/Dreamstime.com Ensuring a building’s durability and energy efficiency hinges on a continuous air barrier throughout the building enclosure. Properly implemented tie-ins enhance the energy efficiency and longevity of buildings and ensure the building envelope acts as one system.

Waterproofing Systems 52

Waterproofing Systems Building Materials Manufacturing Roofing Systems Building Materials 52

GCP Applied Technologies

OCTOBER 1, 2018

Concrete producers, contractors, engineers and specifiers must work together to assure quality concrete practices are followed when using air entrained concrete. air entrained concrete specifications should be clearly written and comply with Chapter 19 of ACI 318R-14 (Building Code Requirements for Structural Concrete).

Quality Assurance 60

Quality Assurance Curing Quality Control Structural Systems 60

CCR Magazine

OCTOBER 16, 2024

This discusses the importance and application of torque-controlled bolts in residential construction. Torque-controlled bolts provide reliable connections in construction. Proper installation techniques are crucial for performance. Key Takeaways Certifications ensure compliance with safety standards.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Code Compliance Controls Manufacturing Quality Control 52

Construction Specifier

OCTOBER 29, 2020

Good quality control can result in significant cost and time savings. Therefore, it is in every owner’s interest to promote quality and require contractors who maintain the highest industry standards that are confirmed by certification, such as the ones offered by the American Concrete Institute (ACI). Quality Assurance.

Quality Assurance 49

Quality Assurance Painting/finishing Quality Control Building Performance Measurement 49

Construction Specifier

MAY 30, 2025

By Andrew Irvine Photos and illustration courtesy TYPAR Construction Products In recent years, moisture management has become increasingly important for multifamily and commercial construction teams due to higher expectations for building performance and more stringent building codes and regulations.

Building Performance Measurement 52

Building Performance Measurement Fire Protection System Installation Building Materials Manufacturing Wall Systems 52

Stok

AUGUST 19, 2021

An integrated design charrette allows stakeholders like the investment team, property management, and building occupants to share their perspectives and ideas about the project at a time when their feedback can still be easily and inexpensively incorporated into the design. A few of these key strategies are outlined below. #1:

Renewable Energy Systems 52

Renewable Energy Systems Building Performance Measurement Real Estate Development Building Commissioning 52

Construction Specifier

FEBRUARY 10, 2025

to create an effective, durable, and building code-compliant assembly. These components and their effect on building performance are outside the scope of this article. Similarly, open-cell spray polyurethane foam (ocSPF) is used in building envelope assemblies as an air and thermal barrier.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Performance Measurement Controls Manufacturing Building Materials 52

Construction Specifier

DECEMBER 18, 2024

Its strength, durability, and resiliency are integral to sustainable building practices and support a growing emphasis on climate resilience. Designers, engineers, architects, and general contractors play an integral, interconnected role in selecting concrete products to meet the performance, safety, and schedule demands of a given project.

Concrete Pouring 52

Concrete Pouring Environmental Impact Assessment Building Performance Measurement Building Materials Manufacturing 52

CCR Magazine

JULY 25, 2024

Advanced management services offer comprehensive solutions that can revolutionise how construction projects are executed, ensuring they are completed on time, within budget, and to the highest quality standards. A client’s satisfaction level with a specific project correlates with the quality of work and the time taken to complete it.

Construction Management 52

Construction Management Building Information Modeling (BIM) Quality Assurance Risk Management 52

CCR Magazine

OCTOBER 15, 2024

Construction Mockups and Testing A presentation entitled “Construction Mockups & Testing | Overview, Trends, and Best Practices” was led by Christopher Grey, a principal in the Simpson Gumpertz & Heger ( SGH , [link] Building Enclosures Division in Boston. They are not just a quality assurance program,” said Grey.

Building Performance Measurement 52

Building Performance Measurement Quality Assurance Wall Systems Building Materials 52

CCR Magazine

FEBRUARY 20, 2024

Well-designed metal ductwork is crucial for managing airflow and maintaining good indoor air quality in modern buildings. Supporting Components In addition to the main duct runs transferring air to diffusers, properly engineered systems include volume control dampers, turning vanes, access doors, support hangers, and insulation.

HVAC System Installation 52

HVAC System Installation HVAC Systems Steel Fabrication Quality Control 52

Develop Coaching

MARCH 10, 2025

In this guide, Ill show you exactly how to build a self-sufficient team through effective delegation in construction so your business can thrive even when you’re not there. To build a team capable of running your business without constant oversight, you must prioritise hiring leaders who can manage tasks independently.

Schedule Management 52

Schedule Management Quality Control Building Performance Measurement Project Management 52

Construction Specifier

OCTOBER 12, 2021

When specifying flooring, one should consider both sustainability and performance. These factors not only contribute to the sustainability of the flooring, but how it performs. From a performance standpoint, even a sustainably made floor must be installed correctly to be truly sustainable.

Sustainability 52

Sustainability Building Resilience Flooring Systems Building Code Compliance 52

Job Order Contracting

FEBRUARY 20, 2023

The J OCPB (JOC Price Book: reflects the current local costs in detail for construction tasks expected to be performed in the geographical area of the base contract with the primary use of developing a detailed line-item price. Labor line items are not to provide services, typically performed under a separate service or requirements contract.

Contracts 105

Contracts General Contracting Government Works Cost Control 105

CCR Magazine

OCTOBER 28, 2024

The redesign also makes it easier to build a new environment that would reflect your brand. Enhance employee well-being: Lack of light, no presence of plants and flowers and the organization’s facility affect the health, satisfaction level and performance. Boost brand image: It creates first impression on your customers and talents.

Building Permits 52

Building Permits HVAC Systems Cost Control Quality Control 52