Construction Specifier

SEPTEMBER 4, 2024

By Chris Bennett, iSCS, CDT, James Longo, iSCS, and Keith Robinson, RSW, FCSC, FCSI, LEED AP RSW, FCSC, FCSI Photo by Magda Biernat Photography Concrete floors are used in wide-ranging facilities, such as industrial data centers, commercial high-rise buildings, and residential homes.

Building Performance Measurement 82

Building Performance Measurement Curing Concrete Pouring Flooring Systems 82

Construction Specifier

NOVEMBER 29, 2024

By Tracy Cook Photos courtesy Tarkett There are many expectations from indoor spaces today: they must look aesthetically pleasing but be strong enough to withstand heavy use, be easy to clean but not feel sterile and unwelcoming, and they should feature healthy, sustainable materials that support human and environmental health.

Flooring Systems 59

Flooring Systems Building Resilience Building Performance Measurement Environmental Impact Assessment 59

CivilJungle

NOVEMBER 1, 2020

How Is Concrete Made. Concrete is a composite material composed of fine and coarse aggregat e bonded together with a fluid cement ( cement paste ) that hardens (cures) over time. When aggregate is mixed with dry cement and water , the mixture forms a fluid slurry that is easily poured and moulded into shape.

Concrete Pouring 98

Concrete Pouring Building Materials Manufacturing Curing Building Materials 98

GCP Applied Technologies

FEBRUARY 19, 2018

ASTM F710: Preparing the Concrete Floor. Why prepare the concrete slab? There are many factors that go into a successful flooring installation project, from selecting an appropriate floor material to a proper installation procedure. But just as important as these—and often overlooked—is careful preparation of the concrete slab.

Concrete Pouring 60

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 60

GCP Applied Technologies

MARCH 6, 2020

Concrete mix design. concrete / mix design. . Control flow concrete. Controlled low-strength material (CLSM). Supplementary cementitious materials (SCMs). Control flow concrete. Controlled low-strength material (CLSM). Supplementary cementitious materials (SCMs). Control flow concrete.

Concrete Pouring 78

Concrete Pouring Controls Manufacturing Building Materials Manufacturing Building Controls 78

Construction Specifier

DECEMBER 18, 2024

Photos courtesy Heidelberg Materials In the built environment, concrete is a critical construction material for futureproofing against the effects of climate change. Its strength, durability, and resiliency are integral to sustainable building practices and support a growing emphasis on climate resilience.

Concrete Pouring 52

Concrete Pouring Environmental Impact Assessment Building Performance Measurement Building Materials Manufacturing 52

UK Construction Blog

SEPTEMBER 22, 2023

The post Exploring the Benefits of Reinforced Autoclaved Aerated Concrete (RAAC) appeared first on UK Construction Blog. Do you know that reinforced autoclaved aerated concrete (RAAC) has played a significant role in public building construction over the past decades?

Safety Regulations 64

Safety Regulations Building Performance Measurement Building Materials Manufacturing Concrete Pouring 64

BDC Network

MARCH 29, 2024

Demystifying carbon offsets vs direct reductions 0 qpurcell Fri, 03/29/2024 - 11:18 Sustainability Chris Forney, Principal, Brightworks Sustainability, and Rob Atkinson, Senior Project Manager, IA Interior Architects, share the misconceptions about carbon offsets and identify opportunities for realizing a carbon-neutral building portfolio.

Energy Efficiency 85

Energy Efficiency Environmental Impact Assessment HVAC System Installation Building Materials Manufacturing 85

UK Construction Blog

JUNE 25, 2025

Jackhammers reach 90-110 decibels during concrete breaking work. Impact drivers create 85-100 decibels when fastening materials. Wrecking balls generate 110-130 decibels during building destruction. Concrete breakers produce sustained noise above 100 decibels for hours during structural removal work.

Environmental Impact Assessment 40

Environmental Impact Assessment Health Regulations Construction Machinery Heavy Equipment Manufacturing 40

CivilJungle

MAY 1, 2022

What Is A Concrete Pump? A Concrete Pump is operated to transmit freshly blended concrete from the containers to where it must serve at the construction site, and therefore, it is an important differentia of any construction project. Concrete Pump on Construction Site. Types of Concrete Pump. Truck Mounted Pump .

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Piping Installation Site Planning 52

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating. A 102-mm (4-in.)-thick

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

CivilJungle

APRIL 26, 2020

What Is Concrete? Concrete is the final product resulting from mixing cement , aggregates (including sand), water, and mixtures. The first use of concrete was by the Roman Empire. The Pantheon is the largest unreinforced concrete dome in the world, built-in 120 A.D. Different Types of Concrete. Dry lean Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

CCR Magazine

JUNE 21, 2024

he towering skyscrapers that grace the cityscapes, the sturdy bridges that connect communities, and the intricate foundations of every home – all these marvels of construction rely heavily on a workhorse machine: the concrete pump. Imagine the backbreaking labor and logistical nightmare it would be to move tons of heavy, wet concrete by hand.

Concrete Pouring 52

Concrete Pouring Heavy Equipment Manufacturing Cost Control Controls Manufacturing 52

CivilJungle

JUNE 8, 2021

Introduction of Concrete Construction Tools for Construction Sites. Concrete is one of the most widely used building materials in the Construction Industry. There are various types of concrete construction tools are used on the construction site. Concrete construction tools plays a vital role in construction.

Concrete Pouring 52

Concrete Pouring Painting/finishing Heavy Lifting Transportation Material Handling 52

Construction Specifier

AUGUST 9, 2022

customers were not satisfied with accepting the system’s historical performance and European test results. They needed to be certain Tindall Superior Lightweight All-Purpose Beam (T-SLAB ® ) met International Building Code (IBC) requirements and would deliver the kind of performance Tindall customers have come to expect.

Flooring Systems 52

Flooring Systems Building Performance Measurement Structural Systems Building Products Distribution 52

CivilJungle

DECEMBER 4, 2021

Instead of weight sometimes the volume of bitumen is specified, Presenting asphalt concrete mix design. In this ordinary capillary type-specific gravity bottle the materials are used that remain absolute fluid at 25 °C temperature. For the measure of the temperature of water in the ductility apparatus bath thermometer is used.

Concrete Pouring 52

Concrete Pouring Building Performance Measurement Roofing Systems Material Storage 52

CivilJungle

FEBRUARY 21, 2021

To provide a high-performance, smooth, and durable surface that can last several years and withstand heavy loads, epoxy coatings are typically applied over concrete floors. To maintain safe and secure conditions for staff, machinery, and inventory, many manufacturing sites, warehouses, and commercial buildings rely on epoxy floors.

Flooring Systems 52

Flooring Systems Concrete Pouring Curing Building Materials Manufacturing 52

CivilJungle

FEBRUARY 22, 2021

By doing sieve analysis with normal sieves, it is measured. By doing sieve analysis with normal sieves, it is measured. So, we require all sizes of sieves in the coarse aggregate measurement. Balance or scale with precision to measure 0.1% of the test sample’s weight. A set of IS sieves is used to sieve the sample.

Zoning 52

Zoning Building Performance Measurement Concrete Pouring Building Products Distribution 52

CivilJungle

MAY 28, 2021

Construction is the methodology of developing a building or infrastructure. Manufacturing refers to production of comparable items with no particular purchaser, while construction occurs on a location for a known client. What is Building Construction? Building development is the methodology of addition of structure to property.

Building Performance Measurement 52

Building Performance Measurement Building Materials Manufacturing Building Permits Project Management Consulting 52

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? As we dive into the various types of shuttering materials and techniques, prepare to be amazed by the innovative systems that enable complex and unique structures to come to life.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CivilJungle

MAY 1, 2021

Fly ash is a pozzolan, a liquid that contains aluminous as well as siliceous material which creates cement in the presence of water. This renders fly ash ideal as a raw material for mixed cement , mosaic tiles , and hollow bricks , among many other construction materials. Fly Ash in Concrete. Benefits of Fly Ash Concrete.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Cost Control 52

In Eight

OCTOBER 4, 2023

Because these projects are characterized by “smarter” technologies incorporated into the built asset and more stringent building requirements, having this more holistic view can be the difference between successfully meeting project outcomes or becoming the latest to overshoot budget and schedule expectations. Connected analytics.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Schedule Management Environmental Impact Assessment Building Performance Measurement 52

CivilJungle

OCTOBER 20, 2021

Glass is generally the oldest material and fancy material which is used in the building industry and for other purposes. Glass is also a fascinating material among people since its discovery. Glass is basically a hard material that is transparent in nature. This type of glass is also known as soda-lime glass.

Electrical Wiring Installation 52

Electrical Wiring Installation Building Materials Manufacturing Building Materials Concrete Pouring 52

Autodesk Construction Cloud

NOVEMBER 2, 2021

Whether you’re pouring concrete or tracking project costs, it’s a powerful thing when so many people can point to a single project and say, “we did that.” Christian Paul , Gilbane Building Company. Yesenia Rivera Martinez , Largo Concrete, Inc. It’s the people serving this great industry that we are here to celebrate.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Project Management Consulting Integrated Project Delivery (IPD) Project Management 52

Work Gearz

OCTOBER 5, 2020

Making a house or an industry or a commercial building is our dream, but we cannot make it come true without the help of the construction workers who work day and night in the hazardous environments, handle cements and sand, walk in watery areas and carry those heavy bricks and loads. Materials: Front - 300D woven polyester.

Building Products Distribution 40

Building Products Distribution Site Planning Fire Protection System Installation Change Management 40

Job Order Contracting

SEPTEMBER 12, 2018

Preventive maintenance services should be performed by a qualified manufacturer’s service representative. Review manufacturer’s instructions. Notify affected personnel before performing PM (alarmed or security entrances). Check hydraulic unit fluid level and pressures/ change fluid per manufactures recommendations.

Maintenance 40

Maintenance Fire Protection System Installation Fire Protection Systems Electrical Wiring Installation 40

CivilJungle

APRIL 5, 2021

Slabs are structural elements manufactured from concrete constructed to produce flat surfaces, usually horizontal, in building floors, roofs, bridges. If reinforcement is required, slabs could also be pre-stressed or the concrete will be spilled over rebar positioned within the framework. What Is a Slab?

Roofing Systems 52

Roofing Systems Concrete Pouring Fire Protection System Installation Flooring Systems 52

CivilJungle

NOVEMBER 2, 2022

Measure what model pump you want is not simple work, but calculating the proper size of pipe, drain corner, and walkways with reserve length. The pump will not correct measure for the basin , so no matter what you attempt, the sump pump won’t manage the water. Top 10 PVC Pipe Manufacturers in India. Tape measure.

Piping Installation 52

Piping Installation Plumbing Systems Plumbing Electrical Wiring Installation 52

The Korte Company

JUNE 16, 2020

Trekking his way through a jobsite, mud nearly pulling his boots off, surveyor Mark Grinter must identify a precise measurement amidst the muck. Mark then performed surveying work for Flagg and Associates in Edwardsville (one of the area’s largest engineering firms at the time) and Madison County Surveyors.

Surveying 52

Surveying Building Performance Measurement Project Management Controls Manufacturing 52

UK Construction Blog

APRIL 2, 2025

From glossy finishes to customisable colours and textures, these synthetic resin coatings can be installed over existing concrete surfaces to enhance both appearance and performance. This high-performance flooring solution bonds exceptionally well to concrete, forming a strong connection that prevents peeling or flaking over time.

Flooring Systems 52

Flooring Systems Heavy Equipment Manufacturing Curing Concrete Pouring 52