UK Construction Blog

MARCH 26, 2025

The post Top 10 Construction Defects: Prevent These Costly Building Mistakes appeared first on UK Construction Blog. Key Takeaways Construction defects commonly stem from design deficiencies, poor workmanship, substandard materials and inadequate quality control, potentially reducing property values by up to 25%.

Electrical Wiring Installation 52

Electrical Wiring Installation HVAC System Installation Fire Protection System Installation Plumbing Systems 52

Roads Online

JUNE 1, 2025

This is just one of the reasons why the company introduced Cat Compaction Control, a technology portfolio that focuses on giving operators an intelligent compaction system. A lot of companies, when they offer compaction technology, they offer an accelerometer, which measures drum decoupling, he says.

Building Performance Measurement 52

Building Performance Measurement Controls Manufacturing Cost Control Building Controls 52

Construction Specifier

DECEMBER 23, 2024

on the exterior of the building, which increases the effective thermal resistance of the assembly. EIFS is also a cost-competitive cladding in many markets. These details can negate the schedule and/or cost savings that prefabrication can offer. EIFS provides continuous insulation (c.i.)

Prefabrication 52

Prefabrication Fire Protection System Installation Wall Systems Building Materials Manufacturing 52

Civil + Structural Engineer

NOVEMBER 21, 2024

Vista Pointe represents a rare opportunity to build a luxury waterfront community with outstanding amenities and unparalleled views of Manhattan. The Company also develops master-planned and golf course communities as well as operates its own lumber distribution, house component assembly, and manufacturing operations. Yearley, Jr.

Real Estate Development 130

Real Estate Development Land Use Regulations Risk Management Building Materials Manufacturing 130

Construction Specifier

NOVEMBER 28, 2024

By Amy Becker Photo courtesy Fenestration and Glazing Industry Alliance (FGIA) Specifiers and design professionals should always consider seismic performance attributes for buildings in areas that previously have experienced the damaging effects of earthquakes. Building codes are adopted with the intent to preserve life and safety.

Building Performance Measurement 52

Building Performance Measurement Wall Systems Building Code Compliance Structural Systems 52

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

CCR Magazine

MARCH 12, 2025

One of the most effective ways to do so is through sustainable renovation , which reduces carbon emissions and leads to long-term cost savings. Energy-Efficient Building Materials and Design Businesses’ primary strategy to decrease their carbon emissions involves selecting sustainable construction materials.

Sustainability 52

Sustainability Energy Conservation Energy Efficiency Building Materials Manufacturing 52

BD+C

MARCH 31, 2023

Voice of the Brand When hurricanes, tornados, extreme temperatures, snow and ice, or salty ocean air have the potential to impact a structure, it is critical to design a building envelope system that will protect the occupants from the elements and deliver a comfortable environment.

Zoning 105

Zoning Fire Protection System Installation Fire Protection Systems Building Performance Measurement 105

CCR Magazine

APRIL 14, 2025

We created a solution that will revolutionize the installation of renewable energy facilities worldwide by providing a safer, faster, repeatable, and more cost-effective means of deploying solar installations in remote locations, said David Lincoln, Rosendin Senior Vice President. These machines effortlessly handle PV panels weighing 100 lbs.,

Renewable Energy Systems 52

Renewable Energy Systems Electrical Systems Energy Efficiency Building Performance Measurement 52

Construction Specifier

JUNE 3, 2024

According to Independent Floor Testing & Inspection (IFTI), the leading cause of flooring failures is moisture, costing the industry $2.4 These new tools and products are often specific to the manufacturer, and each manufacturer has different instructions and application guidelines. billion each year in remediation.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

CCR Magazine

FEBRUARY 5, 2025

Whether heating a space or some type of fluid in a manufacturing process, using leftover heat is an energy efficient way to preheat another system. Read on for an overview of heat exchangers and learn how a regular assessment program saves energy, reduces costs, and helps facility staff stay focused on their priorities.

Energy Conservation 52

Energy Conservation Energy Efficiency Building Performance Measurement Cost Control 52

UK Construction Blog

MARCH 14, 2025

Plus, handling routine maintenance yourself, like checking fluid levels or preparing for your MOT , can help you stay on top of costs and avoid unexpected repair bills. Build or purchase a bench 36-40 inches high with a solid hardwood or metal top that can withstand heavy tools and parts.

Maintenance 52

Maintenance Fire Protection System Installation Heavy Lifting Transportation Fire Protection Systems 52

UK Construction Blog

JUNE 25, 2025

Legal obligations require employers to assess, control, and review noise exposure under the Control of Noise at Work Regulations 2005, providing mandatory hearing protection at 80 dB and health surveillance for at-risk workers. Wrecking balls generate 110-130 decibels during building destruction.

Environmental Impact Assessment 40

Environmental Impact Assessment Health Regulations Construction Machinery Heavy Equipment Manufacturing 40

CCR Magazine

JANUARY 24, 2025

Embracing sustainability is a powerful strategy for business growth, offering environmental benefits, cost savings, and a competitive edge. By optimizing resource use, companies can cut waste and reduce costs in areas like energy and water usage. Using energy management systems allows you to monitor and control usage more precisely.

Sustainability 52

Sustainability Renewable Energy Systems Energy Efficiency Green Building 52

Autodesk Construction Cloud

SEPTEMBER 28, 2022

Project stakeholders can now access critical model data with fewer steps; powerful new features provide greater control over cost and schedule management. The model is a great source of truth during design and planning, but data isn’t easily transferred to construction teams during the build phase of a project. New Orleans, LA.,

Building Information Modeling (BIM) 96

Building Information Modeling (BIM) Building Products Distribution Schedule Management Property Management 96

GCP Applied Technologies

JANUARY 9, 2019

Shortfalls of high-performance adhesives. Replacing a floor that has been damaged by moisture can cost many times the original installation expense and this risk should be taken seriously. . Given how common moisture problems are today, flooring contractors should build moisture mitigation into their schedule. return to top.

Building Performance Measurement 92

Building Performance Measurement Warranty Cost Control Building Materials Manufacturing 92

Construction Specifier

SEPTEMBER 4, 2024

By Chris Bennett, iSCS, CDT, James Longo, iSCS, and Keith Robinson, RSW, FCSC, FCSI, LEED AP RSW, FCSC, FCSI Photo by Magda Biernat Photography Concrete floors are used in wide-ranging facilities, such as industrial data centers, commercial high-rise buildings, and residential homes.

Building Performance Measurement 82

Building Performance Measurement Curing Concrete Pouring Flooring Systems 82

CivilJungle

APRIL 27, 2023

An entire station is a combination of a digital theodolite, an electronic distance measuring device (EDM) and a microprocessor with a memory unit. When the Digital theodolite has been used with a built-in electronic distance-measuring unit, the birth of this new concept in fully automated surveying started.

Surveying 98

Surveying Building Performance Measurement Mapping Foundation Systems 98

UK Construction Blog

MARCH 13, 2025

Twin-wall polycarbonate panels provide excellent thermal efficiency with 80-85% light transmission, creating stable growing conditions year-round whilst reducing energy costs by up to 40%. Assembly requires basic DIY skills, with many manufacturers providing modular designs that fit together using clips, screws, or sliding mechanisms.

Wall Systems 52

Wall Systems Structural Systems Foundation Systems Building Materials Manufacturing 52

Civil + Structural Engineer

SEPTEMBER 9, 2024

Digital twin technology is extremely useful in the built world as it helps solve various industry-specific challenges, including cost optimization, safety, thorough planning, predictive modeling, and more. From planning through construction to the operation of a building, there are enormous amounts of data created by multiple stakeholders.

Risk Management 130

Risk Management Cost Control Project Management Controls Manufacturing 130

Construction Specifier

OCTOBER 1, 2024

Whether creating new architectural expressions or rehabilitating architecturally significant historic buildings, from stick-built to unitized, “off-the-shelf” commodity to custom bespoke systems, utilizing insulating glass units or opaque spandrel panels, simple flat or complex geometry; it seems the sky is the limit with curtain wall design today.

Wall Systems 104

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 104

GCP Applied Technologies

MARCH 6, 2020

Control flow concrete. Controlled low-strength material (CLSM). Control flow concrete. Control flow concrete. Controlled low-strength material (CLSM). Control flow concrete. TB-1701 – Rheology-modifying high-range water reducer (HRWR) for the production of control flow concrete. Clay mitigation.

Concrete Pouring 78

Concrete Pouring Controls Manufacturing Building Materials Manufacturing Building Controls 78

Building Radar

JULY 31, 2024

Modern construction projects are increasingly defined by the materials used, which impact everything from durability and energy efficiency to aesthetics and cost. This article explores a range of innovative building products transforming the construction industry today, highlighting their applications and benefits.

Renewable Energy Systems 52

Renewable Energy Systems Building Materials Manufacturing Building Performance Measurement Energy Efficiency 52

LetsBuild

JUNE 9, 2023

Today, construction teams rely on Building Information Modeling (BIM) to create and manage information during the entire lifecycle of a project. It brings architects, engineers, developers, contractors, manufacturers, and other professionals together to work within one 3D model.

Building Information Modeling (BIM) 98

Building Information Modeling (BIM) Building Code Compliance Lean Construction Site Planning 98

Autodesk Construction Cloud

JANUARY 18, 2024

Our latest white paper, ‘Building Net Zero and The Role of Data in Green Construction’ , investigates the current landscape for sustainability in construction across APAC – as well as potential solutions. The manufacturing, construction and building sectors account for 17% and 4% of GHG emissions in the region respectively.

Environmental Impact Assessment 84

Environmental Impact Assessment Building Materials Manufacturing Green Building Renewable Energy Systems 84

Building Radar

AUGUST 6, 2024

Automation is revolutionising various industries by improving efficiency, reducing costs, and enhancing productivity. Automation refers to the use of technology to perform tasks with minimal human intervention. Key Components of Automation Hardware : Includes robots, sensors, and actuators that perform physical tasks.

Building Automation 52

Building Automation Building Information Modeling (BIM) Building Performance Measurement Construction Machinery 52

Autodesk Construction Cloud

AUGUST 4, 2022

With 3D printers now capable of printing building walls and processing cement, the technology could help reshape construction as we know it. Prior to the adoption of building information modeling (BIM) , 3D printing was even used by architectural firms to build scale models. Construction took just 17 days. billion by 2024.

Building Information Modeling (BIM) 105

Building Information Modeling (BIM) Building Materials Manufacturing Building Materials Building Performance Measurement 105

UK Construction Blog

APRIL 2, 2025

Various types of epoxy systems are available in Manchester, including self-smoothing systems, decorative metallic finishes, and anti-slip coatings, with costs ranging from 20 to 150 per square metre depending on complexity. You’ll reduce long-term maintenance costs while maintaining quality standards for your flooring.

Fire Protection System Installation 52

Fire Protection System Installation Flooring Systems Heavy Equipment Manufacturing Painting/finishing 52

GCP Applied Technologies

JANUARY 9, 2019

Shortfalls of high-performance adhesives. Replacing a floor that has been damaged by moisture can cost many times the original installation expense and this risk should be taken seriously. Given how common moisture problems are today, flooring contractors should build moisture mitigation into their schedule. return to top. .

Building Performance Measurement 84

Building Performance Measurement Cost Control Warranty Building Materials Manufacturing 84

Roads Online

JUNE 14, 2023

We were able to present all our products, not only from the infrastructure side of the business, but also aggregate, mining, quarrying, asphalt and concrete plant manufacturing and more,” Boil says. “In The RX-405 and RX-505 also include Astec’s Automated Control of Elevation (ACE) grade control.

Controls Manufacturing 94

Controls Manufacturing Quality Control Cost Control Change Management 94

Construction Specifier

AUGUST 22, 2024

Additionally, the government allocates reimbursements based on results, so the survey directly impacts a hospital’s financial performance. When specifying interior finishes such as flooring, building professionals should take the utmost care to ensure all materials help advance these overarching quality measurement components.

Flooring Systems 95

Flooring Systems Environmental Impact Assessment Quality Control Building Performance Measurement 95

UK Construction Blog

MARCH 4, 2025

Taking Measurements and Creating a Budget Taking accurate measurements forms the foundation of a successful garage renovation plan. Measure the entire garage space including height, width, and depth using a tape measure. You’re not alone.

Electrical Wiring Installation 52

Electrical Wiring Installation Material Storage Flooring Systems Ceiling Systems 52

UK Construction Blog

JANUARY 25, 2025

The post Made-to-Measure Windows: A Time-Saving Solution Becoming Popular With UK Contractors appeared first on UK Construction Blog. The UK construction sector has a skills gap despite ambitious building targets. Built-to-measure windows are a quick solution, simplify installation, save on labour and improve building performance.

HVAC System Installation 52

HVAC System Installation Building Materials Manufacturing Building Performance Measurement Energy Efficiency 52

BDC Network

APRIL 27, 2023

Devin Bowman, Technical Glass Products Passing The Test for Safer School Design With the threat of school-targeted violence, how can the building industry work together to ensure the safety of students and teachers? Schools that intend to improve the security of their buildings through glass do so voluntarily.

Fire Protection Systems 90

Fire Protection Systems Building Codes Building Standards Building Performance Measurement 90

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

Job Order Contracting

AUGUST 20, 2023

A credible construction cost estimate is required prior to engaging in procurement. The follow elements are common to a credible construction cost estimate. Credible Cost Estimate Core Elements #1 Objectivity – The information used and those invovled in the creation of the construction cost estimate must be objective.

Estimating 98

Estimating Structural Systems Schedule Management Risk Management 98

UK Construction Blog

FEBRUARY 12, 2024

Hydraulic door opener and closer, assume a critical role in the domain of modern architecture and building design, due to their usefulness and comfort. These gadgets, controlled by hydraulic mechanisms, have revolutionized how we installed the doors, offering simple methods as well as improved energy effectiveness.

HVAC System Installation 64

HVAC System Installation Building Controls Cost Control Controls Manufacturing 64