Remove Curing Remove Lifts Remove Steel Fabrication
article thumbnail

Yellowstone River Bridge Sits Tall at Top of Canyon to Improve Safety, Access and Views

ENR Construction

Rising 180 ft above the river gorge, the four-span steel plate girder bridge will replace the existing structure, which was built in 1961 and is located just 700 ft to the southeast. We had to have a liquid cooling system for the concrete and monitor the temperature to make sure it was curing properly.” —Jon Photo courtesy NPS/Jacob W.

article thumbnail

What Is Formwork | Use of Materials in Formwork | Types of Formwork | Requirements Good of Formwork | Advantages & Disadvantages

CivilJungle

Form of steel. The combined form of wood-steel. A steel shutter is then used to obtain the correct form and purpose of the aesthetics. Steel Formwork. The fabrication process for that kind of sort of formwork is easily understandable, so it does not involve skilled labor. Steel Formwork-. Type of plywood.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

The Start of Celebration: the 2023 Yearbook of Engineering Achievement

Civil + Structural Engineer

After consideration from the project team, it was decided to utilize a fabric formed concrete mattress. Construction was completed over the winter season, from November to April, which created challenges with protecting the concrete during the curing process in extreme cold temperatures.

article thumbnail

The Los Angeles County Museum of Art: Enormous Complexity Under a Veil of Simplicity

ENR Construction

There is a bottom spherical dish, a stainless steel lined top and an inverse spherical dish with a slider in the middle,” Long explains. The PT cables—steel housed inside red plastic sheaths—were daylighted at the perimeter, where there was a temporary leave out zone. Well, this concrete building is exactly that. as predicted.

article thumbnail

A Primer on MasterFormat & Improving Construction Project Collaboration

Building Information Management

01 43 19 Fabricator Qualifications. 03 21 11 Plain Steel Reinforcement Bars. 03 21 13 Galvanized Reinforcement Steel Bars. 03 21 16 Epoxy-Coated Reinforcement Steel Bars. 03 21 19 Stainless Steel Reinforcement Bars. 03 22 00 Fabric and Grid Reinforcing. 03 22 13 Galvanized Welded Wire Fabric Reinforcing.

article thumbnail

A Primer on MasterFormat & Improving Construction Project Collaboration

Building Information Management

01 43 19 Fabricator Qualifications. 03 21 11 Plain Steel Reinforcement Bars. 03 21 13 Galvanized Reinforcement Steel Bars. 03 21 16 Epoxy-Coated Reinforcement Steel Bars. 03 21 19 Stainless Steel Reinforcement Bars. 03 22 00 Fabric and Grid Reinforcing. 03 22 13 Galvanized Welded Wire Fabric Reinforcing.

article thumbnail

Defend against moisture: The importance of proper sealant testing

Construction Specifier

Primary testing helps a fabricator get to know the compatibility nuances and performance characteristics of their glazing system; what material works with what and when. This primary testing also works to provide performance criteria for the fabrication quality control testing procedures.