CCR Magazine

JANUARY 29, 2025

Once the grout has fully cured (typically 24-48 hours), apply a grout sealer following the product instructions. Depending on the type and brand, Grout typically takes 24-48 hours to cure. Buff the Tiles After the grout has dried slightly (around 2 hours), use a microfiber cloth to buff the tiles and remove any remaining haze.

Curing 52

Curing Painting/finishing 52

For Construction Pros

JULY 18, 2025

These solutions could process live data from sensors embedded in concrete and site conditions to provide immediate, actionable insights to field crews, guiding optimal curing practices or identifying potential issues. It was a fantastic example of a contractor pushing the boundaries of existing tools to innovate their on-site process.

Concrete Pouring 52

Concrete Pouring Building Information Modeling (BIM) Construction Equipment Cost Control 52

CCR Magazine

FEBRUARY 4, 2025

The best way to prevent concrete spalling is to seal your concrete with a quality, high-grade seal and cure product. You should never ignore the symptoms of spalling because the damage and instability can be far wider spread than an initial visual inspection reveals. How Do You Prevent Concrete Spalling?

Concrete Pouring 52

Concrete Pouring Material Handling Building Materials Curing 52

Roads Online

APRIL 30, 2025

It quickly penetrates stabilised, bound, or unbound granular compacted base courses, eliminating the need for a curing period and allowing for same-day application of the next layer. This article was originally published in the April edition of our magazine. To read the magazine, click here. This enhances project productivity.

Building Performance Measurement 66

Building Performance Measurement Building Products Distribution Sustainability Infrastructure Development 66

CCR Magazine

NOVEMBER 14, 2024

The test methods in the standard simulate actual field installations that occur prior to full cure of the sealant and liquid applied flashing. The test methods section was updated to include instructions for liquid applied flashing.

Curing 52

Curing 52

CCR Magazine

APRIL 15, 2025

Speed Over Price in Coatings Selection: When selecting passive fire protection coatings, cure time (27%) was the top priority, followed by durability/longevity and price (both 18%). This signals that construction decision-makers prioritize coating performance over cost savings alone.

Fire Protection Systems 78

Fire Protection Systems Surveying Controls Manufacturing Cost Control 78

For Construction Pros

JUNE 26, 2025

Maturixs wireless sensor technology allows remote real-time monitoring of concrete properties during the curing and hardening process, enabling contractors to optimize their operations and ease traceability requirements.

Construction Equipment 52

Construction Equipment Cost Control Quality Control Schedule Management 52

CCR Magazine

JANUARY 28, 2025

However, achieving these benefits requires proper handling, mixing, and curing. Professional concrete services ensure that your foundation is stable, properly cured, and resistant to environmental factors. Weather Conditions Extreme weather can affect concrete curing. Here are some common uses: 1.

Concrete Pouring 52

Concrete Pouring Curing Building Materials Manufacturing Material Handling 52

For Construction Pros

JUNE 18, 2025

Decorative Concrete > Coatings & Sealants" class="section-feed-content-node__website-section-name"> Coatings & Sealants Daich Coatings Unveils DaiHard MAX Epoxy Floor Coating Double Kit Daich Coatings The DaiHard MAX Double kit comes in gray or tan and a new clear option.

Heavy Equipment Manufacturing 52

Heavy Equipment Manufacturing Flooring Systems Construction Equipment Building Materials Manufacturing 52

For Construction Pros

JUNE 9, 2025

Polyurea-based If rapid access to the repairs is essential to a facility’s operation, polyurea based products provide the fastest cure and access times — often within an hour or two. In all cases, special consideration may be required for food/drug safety or odors from repair products being objectionable to facility workers.

Heavy Equipment Manufacturing 52

Heavy Equipment Manufacturing Construction Equipment Flooring Systems Building Products Distribution 52

Business Facilities

NOVEMBER 15, 2021

Italy-based cured meats producer Veronesi will expand its customer base and create more than 150 jobs with its new Rockingham County, VA facility. Facility In Virginia appeared first on Business Facilities Magazine. The post Italy’s Veronesi To Establish First U.S.

Curing 52

Curing 52

Roads Online

MAY 2, 2024

“Teretek is inert and is created by an irreversible reaction that results from a combination of plural components at the point of injection,” Andrews says. “There is no degradation of the mixture once it has been injected and cured. To read the magazine, click here.

Environmental Impact Assessment 105

Environmental Impact Assessment Infrastructure Development Geotechnical Engineering Property Management 105

Roads Online

JANUARY 4, 2024

Roads & Infrastructure Magazine reflects on the important topics and conversations addressed at the 19th AfPA International Flexible Pavement Conference in Brisbane, as well as why there continues to be optimism towards the future of flexible paving. This article was originally published in the December edition of our magazine.

Stakeholder Engagement 105

Stakeholder Engagement Infrastructure Development Sustainability Construction Machinery 105

Roads Online

JULY 27, 2023

Our technical experts have refined the product over recent years balancing the ease of handling, speed of curing and trackless behaviour, to now have a product that is being used successfully in calibrated sprayers and through pressurised crew trucks,” Richards says. This article was originally published in the July edition of our magazine.

Construction Machinery 98

Construction Machinery Infrastructure Development Construction Equipment Specialty Contracting 98

Roads Online

JUNE 4, 2024

This involves carefully treating and monitoring all groundwater and rainwater runoff while the fresh concrete cures. The post Coates keeps Sydney canal dry for restoration appeared first on Roads & Infrastructure Magazine. Joseph says this process requires constant re-evaluation.

Concrete Pouring 105

Concrete Pouring Electrical Systems Change Management Project Management 105

CCR Magazine

AUGUST 14, 2024

Respect cure times: Allow the coating or sealant to fully cure before applying additional layers or exposing it to heavy use. Cure Times and Maintenance Curing times vary depending on the product. Cure Times and Maintenance Curing times vary depending on the product. Proper cleaning and repairs are crucial.

Painting/finishing 52

Painting/finishing Curing Heavy Equipment Manufacturing Building Materials Manufacturing 52

CCR Magazine

OCTOBER 30, 2024

Anything below 45˚F, and the molecules won’t continue to crosslink to cure for an effective and protective bridge deck overlay system. “Our system doesn’t use polyether amines, a curing compound common for epoxy resins. R&D Chemist, Meridian.

Curing 52

Curing Structural Systems Construction Management 52

Roads Online

JUNE 20, 2024

The post Choosing the right temporary heating solution for your site appeared first on Roads & Infrastructure Magazine. With branches in key locations across Australia, Coates provides the fast and responsive service that customers need.”

HVAC System Installation 98

HVAC System Installation Electrical Systems Controls Manufacturing Cost Control 98

CCR Magazine

JULY 30, 2024

Coats and Curing For large-scale plastering projects with multiple coats, allow sufficient drying time between each layer according to the manufacturer’s instructions before moving on to applying subsequent coats. Adequate curing enhances the longevity and durability of your finished work.

Painting/finishing 52

Painting/finishing Curing Quality Control Controls Manufacturing 52

Roads Online

FEBRUARY 1, 2024

These include augmented reality, building design, concrete curing, predictive and preventive maintenance and delivery of environmentally friendly buildings. Blackreach highlights no fewer than 14 areas where using IoT in construction can overhaul established practices.

Building Information Modeling (BIM) 95

Building Information Modeling (BIM) Project Management Consulting Building Materials Manufacturing Environmental Impact Assessment 95

CCR Magazine

OCTOBER 31, 2023

Next, we removed a piece of the slab to expose the void and pumped in thousands of pounds of Strata-Fill, a slow rising foam that expands then cures in place to fill the void and stabilize the soil.” Krayem adds, “We used video of the injection process to make sure the void was completely filled, then sprayed from the outside.”

Heavy Equipment Manufacturing 52

Heavy Equipment Manufacturing Curing Roofing Systems Foundation Systems 52

CCR Magazine

MAY 1, 2024

This trenchless technique creates a ‘pipe within a pipe’, utilising a resin that cures in place over time, resulting in a smoothly functioning pipe system. This resin is key as it hardens upon curing, leaving behind a highly resilient surface, often stronger than the original pipe material.

Plumbing Systems 52

Plumbing Systems Curing Property Management Plumbing 52

CCR Magazine

SEPTEMBER 5, 2024

EucoTilt SB Setting a new standard in tilt-up panel production, EucoTilt SB is a solvent-based bond breaker that features a chemically reactive, membrane-forming cure. EPA and local VOC regulations, including OTC, LADCO, Maricopa County and California standards (e.g., CARB, SCAQMD).

Building Products Distribution 52

Building Products Distribution Curing Flooring Systems Masonry 52

CCR Magazine

FEBRUARY 2, 2024

Here are some top benefits of sustainable sealants: Lower VOC Emissions – They emit fewer hazardous air pollutants during application and curing. Keep these guidelines in mind: Carefully read product specifications and follow the manufacturer’s instructions for surface prep, installation steps, and curing times.

Sustainability 52

Sustainability Building Materials Manufacturing Curing Green Building 52

Roads Online

APRIL 17, 2025

On top of being resistant to chemicals, salts, acids and UV rays, Komobilitys KomoRoad is dry to touch in less than an hour of application, with the roadway also able to be opened to traffic in less than two hours, thanks to rapid curing. This article was originally published in the April edition of our magazine. for moreinformation.

Building Products Distribution 52

Building Products Distribution Building Materials Manufacturing Maintenance Building Materials 52

Roads Online

JUNE 30, 2024

That’s why TEC Container Solutions set out to find a permanent cure for this frequent headache. To read the magazine, click here. The post TEC: One stop storage appeared first on Roads & Infrastructure Magazine. Having a product that’s ready to go and in the right window is another.

Material Storage 52

Material Storage Building Products Distribution Wall Systems Material Handling 52

CCR Magazine

OCTOBER 7, 2024

The final challenge in confirming the concrete mix was the curing process after it was poured. Due to the extreme temperatures in the region, the curing process needed to be slowed enough to allow the mix to be pumped and cast before hardening. To combat this, engineers used a straightforward solution: ice.

Engineering 52

Engineering Concrete Pouring Foundation Systems Building Design 52

CCR Magazine

DECEMBER 10, 2024

Curing and Maintenance Proper curing is vital to achieve the full strength and durability of epoxy coatings. The curing period, typically 24 to 72 hours, requires the area to remain undisturbed. Multiple thin layers are applied, allowing each to dry completely before the next, resulting in a seamless and durable finish.

Flooring Systems 52

Flooring Systems Heavy Equipment Manufacturing Concrete Pouring Curing 52

CCR Magazine

AUGUST 27, 2024

These gummies are made using live resin, a type of cannabis concentrate produced from fresh, flash-frozen cannabis flowers rather than dried and cured buds. This process retains the cannabis plant’s natural flavors and aromas, which are often lost during the drying and curing processes.

Curing 52

Curing Sustainability 52

CCR Magazine

OCTOBER 22, 2024

84 Lumber is also donating $8,400 each to Komen for the Cure: Susan G. Image Courtesy of: 84 Lumber The company will also boost brand visibility at the store level by implementing special store BCA kits that will include cans of pink spray paint, pink branded flags, and 84 Lumber logo stencils.

Painting/finishing 52

Painting/finishing Curing 52

CCR Magazine

MAY 22, 2024

Juicing is a healthy alternative for people searching for cures to things like lack of energy, diseases, and more. What’s the coolest thing you have done since the pandemic hit? Start a juice company What has this experience taught you? If you could change anything, what would you do differently? I would not have hired my friends.

Curing 52

Curing Project Management Construction Management Architecture 52

Civil + Structural Engineer

DECEMBER 1, 2023

The season of celebration and joyous reunion will soon be upon us, and Civil+Structural Engineer Magazine is proud to kickstart the season of celebration by announcing our 2023 Yearbook of Engineering Achievement. IMEG reanalyzed the hydraulics and a four-cell cast-in-place concrete box culvert was selected as the structure.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

CCR Magazine

FEBRUARY 25, 2025

Bergeron, a 20-year veteran of the industry, brings deep expertise in Cured-In-Place Pipe (CIPP) watermain lining, trenchless installation technologies, and large-scale infrastructure solutions. To lead this expansion, Cedric Bergeron, an expert in trenchless watermain renewal, has been appointed as Senior Vice President of Vortex Water.

Piping Installation 52

Piping Installation Curing Contracts Sustainability 52

CCR Magazine

OCTOBER 14, 2024

NBCAM is an internationally recognized campaign held every October to raise awareness about breast cancer and generate funds for research into its cause, prevention, diagnosis, treatment and cure. “By By purchasing our “Give Cancer the Boot!”

Curing 52

Curing Warranty Collaboration Engineering 52

CCR Magazine

OCTOBER 28, 2024

A selection of cured meats like salami, prosciutto, or bresaola. A subscription box to an Australian craft magazine for ongoing inspiration. A jar of locally-made chutney or relish to add a tangy twist. A box of handcrafted Australian chocolates or truffles. A decadent Christmas pudding or fruit mince pies for a sweet treat.

Painting/finishing 52

Painting/finishing Curing Building Design 52

CCR Magazine

MARCH 21, 2024

An easy solution is to spray clean rebar with MCI ® CorShield ® , a water-based coating that cures to a soft non-tacky film and eventually hardens. Even worse, some projects are put on hold after work has started, leaving rebar half exposed and half embedded in concrete.

Concrete Pouring 52

Concrete Pouring Painting/finishing Material Storage Construction Equipment 52

CCR Magazine

FEBRUARY 18, 2025

Instead, correct curing and finishing are required to achieve full strength. Understanding Strong Concrete Surfaces To create durable concrete, it will require very careful surface treatment. It actually isnt about simply pouring the concrete and waiting for it to harden. Usually, the finishing methods include polishing and sealing.

Painting/finishing 52

Painting/finishing Concrete Pouring Infrastructure Development Curing 52