CCR Magazine

APRIL 15, 2025

By moving fireproofing to a controlled off-site environment, we not only ensure quality compliance but also create a safer, more efficient worksite. Speed Over Price in Coatings Selection: When selecting passive fire protection coatings, cure time (27%) was the top priority, followed by durability/longevity and price (both 18%).

Fire Protection Systems 78

Fire Protection Systems Surveying Controls Manufacturing Cost Control 78

UK Construction Blog

MARCH 4, 2025

Quality flooring provides durability while enhancing the overall appearance and value of your garage. Allow adequate curing time before moving heavy items back into the garage. Additional Comfort Improvements Your garage can become a more comfortable space with strategic upgrades to organization, climate control, and air quality.

Electrical Wiring Installation 52

Electrical Wiring Installation Material Storage Flooring Systems Ceiling Systems 52

UK Construction Blog

APRIL 2, 2025

Environmental Benefits : Many modern epoxy systems are low-VOC or VOC-free, contributing to better indoor air quality in Portsmouth buildings while providing an eco-friendly flooring solution. The mixing ratios are critical and must be exact to achieve proper curing and performance. How should I maintain my epoxy floor in Portsmouth?

Flooring Systems 52

Flooring Systems Heavy Equipment Manufacturing Concrete Pouring Painting/finishing 52

For Construction Pros

JUNE 6, 2025

It’s recommended to find out if the slab will have foot traffic or if the quality is an architectural feature. Concrete Placing, Finishing, Sawing and Curing Total Concrete Slab Packages Structural Services Inc. Floating a slab with a plastic blade should produce a clear finish.

Construction Equipment 52

Construction Equipment Painting/finishing Curing Quality Assurance 52

UK Construction Blog

JULY 7, 2025

It was quick, cheap and—at the time—perfectly adequate for infilling between higher-quality brick piers. For homeowners who need proof for insurers or building control, we provide full photographic reports and engineer-stamped drawings. Two hundred years on, it poses serious challenges for renovators who treat it like modern blockwork.

Painting/finishing 52

Painting/finishing Insurance Management Historic Preservation Building Materials 52

For Construction Pros

JUNE 26, 2025

Maturixs wireless sensor technology allows remote real-time monitoring of concrete properties during the curing and hardening process, enabling contractors to optimize their operations and ease traceability requirements. Latest in Technology & Services Sponsored Content The jobsite can be unpredictable, but with DEWALT®, youre ready.

Construction Equipment 52

Construction Equipment Cost Control Quality Control Schedule Management 52

GCP Applied Technologies

MARCH 2, 2018

Top 10 tips for achieving high-quality concrete. Control measures are needed to prevent differential volume changes in the concrete. By equally distributing micro fibers throughout the concrete, you can improve impact resistance and crack control. However, control joints should be used for walls of any thickness. .

Curing 109

Curing Quality Control Building Products Distribution Building Controls 109

GCP Applied Technologies

FEBRUARY 19, 2018

Most concrete contractors are well aware of the difficulty of handling, placing, finishing and curing concrete during the hot summer months. Such conditions tend to impair the quality of freshly mixed or hardened concrete by accelerating the rate of moisture loss and the rate of cement hydration, or otherwise causing detrimental results.

Curing 112

Curing Painting/finishing Site Planning Quality Control 112

UK Construction Blog

SEPTEMBER 22, 2023

Today, it’s a popular alternative to concrete that is moulded and cured on-site. For instance, rather than moulding, setting, and then installing a wall on site, a precast retaining wall can be matched to the specific design of the project, created in the factory, and then allowed to cure in a controlled environment.

Concrete Pouring 119

Concrete Pouring Quality Control Curing Site Planning 119

GCP Applied Technologies

OCTOBER 1, 2018

Control flow concrete for mass pours. For these massive jobs, there is a concern both about the maximum temperature produced during concrete production and maximum temperature shifts that can occur before the concrete finishes curing. What is control flow concrete? Control Flow Concrete. Improved concrete quality.

Concrete Pouring 96

Concrete Pouring Quality Control Cost Control Quality Assurance 96

Construction Specifier

SEPTEMBER 4, 2024

Concrete floor quality depends on several factors, including the concrete mix design, the curing process, including consolidation and finishing. Getting consistent FF and FF on concrete slabs requires careful planning, execution, and quality control (QC) throughout the construction process (Figure 2, page 31).

Building Performance Measurement 82

Building Performance Measurement Curing Concrete Pouring Flooring Systems 82

GCP Applied Technologies

MAY 30, 2019

Choosing a bridge waterproofing membrane that can be sprayed on fast and cures quickly is the first step. It’s equally important to find out how and when quality control measures are taken. How quickly can the waterproofing membrane be applied? . Many liquid waterproofing systems are highly sensitive to moisture. .

Waterproofing Systems 110

Waterproofing Systems Controls Manufacturing Structural Systems Quality Control 110

GCP Applied Technologies

FEBRUARY 19, 2018

Concrete producers are well aware of the difficulty of delivering, handling, placing, finishing and curing concrete, especially during the hot summer months. The concrete can be placed with minimal effort and can be finished quickly so that curing can start before the surface suffers any damage as a result of environmental exposure.

Curing 90

Curing Painting/finishing Environmental Consulting Quality Control 90

Roads Online

JUNE 20, 2024

Image/Coates From maintaining thermal comfort and personal safety, to enabling manufacturing, building and industrial processes, many businesses rely on temperature-controlled environments. Temporary event spaces often require heating solutions too, particularly in marquees or halls that aren’t geared for climate control.

HVAC System Installation 98

HVAC System Installation Electrical Systems Controls Manufacturing Cost Control 98

Construction Specifier

JUNE 3, 2024

Curing problems—High moisture levels can interfere with the chemical curing process of resinous materials, leading to a tacky or soft finish. Incorporating ventilation and dehumidification In some cases, controlling the indoor environment with dehumidifiers and adequate ventilation can contribute to moisture levels.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

Civil + Structural Engineer

SEPTEMBER 1, 2023

However, given the building’s proximity to the London Underground and HS2, vibration control was required for the newly excavated basement level. Owing to the site’s proximity to both the London Underground and major train lines, it was necessary to implement acoustic fittings and vibration control measures.

Flooring Systems 130

Flooring Systems Structural Systems Piping Installation Concrete Pouring 130

GCP Applied Technologies

MARCH 3, 2020

Will the quality of the fly ash change as environmental regulations shift? Combating aggregate quality problems. High quality aggregates are increasingly difficult to find. The scarcity of quality aggregates is leading to the increased use of lower quality aggregates. How expensive will it be? return to top.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

GCP Applied Technologies

OCTOBER 1, 2018

Concrete producers, contractors, engineers and specifiers must work together to assure quality concrete practices are followed when using air entrained concrete. Use appropriate mix designs and quality materials. Learn more about CONCERA® admixtures for control flow concrete . Place, finish, and cure properly.

Quality Assurance 60

Quality Assurance Curing Quality Control Structural Systems 60

GCP Applied Technologies

MAY 28, 2018

Poor casting and vibration, insufficient curing of the concrete, and lower quality aggregates can result in honeycombing, shrinkage cracks, or structure cracks that will allow water to penetrate the structure. In addition, adding water to the mix while the concrete is in transit can compromise the permeability of the concrete.

Waterproofing Systems 113

Waterproofing Systems Concrete Pouring Structural Systems Wall Systems 113

GCP Applied Technologies

MAY 28, 2018

Poor casting and vibration, insufficient curing of the concrete, and lower quality aggregates can result in honeycombing, shrinkage cracks, or structure cracks that will allow water to penetrate the structure. Soil Contamination and its Impact on Indoor Air Quality. Learn more about PREPRUFE® Plus waterproofing membrane.

Waterproofing Systems 104

Waterproofing Systems Concrete Pouring Structural Systems Wall Systems 104

Specification Product Update

APRIL 8, 2024

The success of PMMA relies on its rapid curing qualities as it can dry in 30 – 40 minutes and in some cases even quicker if required, by using additional catalyst. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

Specification Product Update

FEBRUARY 16, 2024

The success of PMMA relies on its rapid curing qualities as it can dry in 30 – 40 minutes and in some cases even quicker if required, by using additional catalyst. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

Specification Product Update

DECEMBER 22, 2023

The success of PMMA relies on its rapid curing qualities as it can dry in 30 – 40 minutes and in some cases even quicker if required, by using additional catalyst. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

Specification Product Update

OCTOBER 13, 2023

The success of PMMA relies on its rapid curing qualities as it can dry in 30 – 40 minutes and in some cases even quicker if required, by using additional catalyst. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

Specification Product Update

AUGUST 17, 2023

The success of PMMA relies on its rapid curing qualities as it can dry in 30 – 40 minutes and in some cases even quicker if required, by using additional catalyst. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Roofing Systems Curing Controls Manufacturing 52

GCP Applied Technologies

FEBRUARY 19, 2020

Despite its prevalence, plastic concrete remains highly unpredictable, with seemingly innumerable factors impacting its performance: climate, geography of source materials, water, admixture, aggregate/sand quality, to name a few. We provide solutions to some common batching problems below…. Topics include: Hot weather concrete batching.

Structural Systems 78

Structural Systems Facility Management Material Handling Building Optimization 78

GCP Applied Technologies

FEBRUARY 19, 2020

Despite its prevalence, plastic concrete remains highly unpredictable, with seemingly innumerable factors impacting its performance: climate, geography of source materials, water, admixture, aggregate/sand quality, to name a few. We provide solutions to some common batching problems below…. Topics include: Hot weather concrete batching.

Structural Systems 78

Structural Systems Facility Management Material Handling Building Optimization 78

Learn Civil Engineering

OCTOBER 3, 2022

Precast concrete is defined as concrete which is cast and cured at different locations and used at other locations. This concrete has good quality control. It is high-quality concrete. This type of concrete has the higher industrialized quality and also it is less affected […]. What is precast concrete?

Quality Control 40

Quality Control Curing 40

CCR Magazine

JULY 30, 2024

Opt for High-Quality Plaster Materials Choosing high-quality plaster materials is crucial for achieving a perfect finish. These plasters are often formulated with additives such as modifiers or retarders that increase their control over setting time and create a smoother finish.

Painting/finishing 52

Painting/finishing Curing Quality Control Controls Manufacturing 52

Construction Specifier

SEPTEMBER 20, 2023

In an SSG application, the silicone sealant bonding the unit to the framing is typically a high-performance, multi-component adhesive designed to function as the structural attachment between noted components, specifically formulated for its adhesive and curing properties which also serves as a primary seal against air and water infiltration.

Structural Systems 59

Structural Systems Building Performance Measurement Quality Control Building Code Compliance 59

CivilJungle

MARCH 13, 2021

To prevent shrinkage, one must have excellent control of early setting the mass concrete intended for a large structure. In mass concrete, to obtain a durable structure with more economy, the mass concrete should be properly designed, placed, and cured. The temperature shrinkage is the major problem in mass concrete work.

Concrete Pouring 52

Concrete Pouring Curing Foundation Systems Structural Systems 52

UK Construction Blog

JANUARY 20, 2025

When done well, it boosts the quality and life span of the building. Quality control is another biggiemess it up, and you risk the whole structure. Quality control ensures the longevity and safety of precast structures. Quality Control Issues Quality control is another major challenge in precast concrete detailing.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Steel Fabrication Concrete Pouring Building Materials Manufacturing 52

Civil + Structural Engineer

DECEMBER 1, 2023

McCarthy first had to construct this project’s bulkhead portion, which was a critical component of the Freeport protection levee system and vital for flood control purposes. The primary goals of the Project were to improve water quality while providing multiple benefits. Bois d’Arc Lake will span 16,641 acres.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

Safety Services Company

MARCH 1, 2016

Most shift working industries are required to identify, assess and control fatigue as part of their health and safety management system. While the only true cure for fatigue is sleep, shift workers will need to rely on naps to maintain alertness, and caffeine can be effective to some degree depending on the individual.

Risk Management 54

Risk Management Safety Regulations Health Regulations Schedule Management 54

Construction Specifier

SEPTEMBER 19, 2024

By understanding the challenges and following best practices, such as ensuring material compatibility, detailed planning, and rigorous quality control, contractors, developers, and specifiers can ensure their air barrier systems designs are effective and durable. Many air barrier materials can also control liquid water intrusion.

Waterproofing Systems 52

Waterproofing Systems Building Materials Manufacturing Roofing Systems Building Materials 52

GCP Applied Technologies

JUNE 7, 2018

Contaminants in the soil and groundwater can pose threats to indoor air quality as vapors from the soil migrate into buildings constructed on these sites. The concrete is then poured and creates a bond with the membrane as it cures. Another environmental concern is soil contamination, which is very common, particularly in urban areas.

Waterproofing Systems 103

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 103

UK Construction Blog

JULY 26, 2023

Imagine being able to churn out thousands of uniform, high-quality bricks per hour with minimal human intervention. In this guide, we delve into the profound impact of automated brick-making machines on building construction in the UK, from elevating productivity levels to ushering in an era of unprecedented quality control.

Building Automation 52

Building Automation Energy Efficiency Quality Control Curing 52