Remove Lifts Remove Plumbing Systems Remove Wall Systems
article thumbnail

Black Buffalo Hits Print on First Internationally Code Compliant 3D-Printed Home

The Pro Builder

The first of its kind in the world, the LoMa home utilizes technology that makes it the first International Code Council Evaluation Service (ICC-ES)-approved home to use load-bearing 3D-printed walls. “We The NEXCON Printer is a modular printing system that, upon set up, can print the walls of a 40-foot by 40-foot home in under 30 hours.

article thumbnail

Robust Facilities Sustainment Solution

Job Order Contracting

to name a few. #2. to name a few. #2. to name a few. #2. Implement a robust physical asset facilities maintenance process integrating scheduled, unscheduled repairs, and preventive maintenance tasks. #3.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

The three Ps of prefabricated EIFS: Preparation, production, placement

Construction Specifier

Babaian Photos and illustrations courtesy Simpson Gumpertz & Heger (SGH) In its most general form, exterior insulation and finish systems (EIFS) consist of expanded polystyrene (EPS) insulation board coated with a reinforced polymer-modified cementitious base coat and a polymer-based finish coat. By Alex Ardelean, Elizabeth V.

article thumbnail

APPLYING SPRAY FOAM INSULATION ON AND AROUND PLASTIC PIPES

Civil + Structural Engineer

PPI and SPFA recommend that when there are plastic pipes and fittings in a wall, ceiling, or floor cavity, the SPF installer should apply one layer of foam until it touches the pipe but does not encase the pipe. In certain instances, pipes and fittings are installed inside areas that must be insulated, such as within a ceiling or wall cavity.

article thumbnail

Alexandria City HS Redevelopment Features Rockfon Ceilings

CCR Magazine

The architectural team specified Rockfon acoustic stone wool ceiling systems to support the new high schools multiple performance requirements and to create a modern appearance aligned with 21st century educational facilities. The Minnie Howard Campus high school offers enhanced daylight, thermal comfort, acoustics and indoor air quality.

article thumbnail

The Start of Celebration: the 2023 Yearbook of Engineering Achievement

Civil + Structural Engineer

It features elements that maximize the safety, security, and efficiency of the travel process including 100 percent automated screening lanes, 100 percent facial recognition “e-gates” for international departure, an innovative landside terminal design, and 100 percent trackable RFID Independent Carrier System.

article thumbnail

What Is Sewerage System | Types of Sewerage System | Why We Need a Partially Separate System | How Does a Sewage Treatment Plant Work

CivilJungle

What Is Sewerage System? Sewerage is a system which expresses sewerage, a soil drainage by means of a sewer. Sewerage reaches the wastewater treatment system or the injection point into the area. Types of Sewerage System: Combined system. Separate system. Partial Separate System. #1.